Extron electronic FOXBOX 4G DVI, FOXBOX 4G VGA instruction

Specifications — FOXBOX 4G DVI/VGA Series

NThe FOXBOX 4G DVI and FOXBOX 4G VGA consist of a transmitter

(FOXBOX 4G DVI/VGA Tx) and a receiver (FOXBOX 4G DVI/VGA Rx) with one or two fiber optic cables linking the two units. They are available in singlemode or multimode versions.

NFor the VGA models, the analog RGB input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog RGB in the receiver.

NThe analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.

NThese transceivers are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11.

Optical fiber interconnection between transmitter and receiver

Number/type �� 1 or 2 fiber optic

NOnly one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.

Connectors �� 2 LC connectors Operating distance

Singlemode�� 30 km (18.75 miles) with singlemode (SM) cables with a FOXBOX 4G SM

Multimode�� 300 m (985') with 62.5 µm multimode (MM) cables with a FOXBOX 4G MM 1 km (3280') with 50 µm multimode (MM) cables with a FOXBOX 4G MM

2 km (6561') with 50 µm 2000 MHz bandwidth laser optimized multimode cable with a FOXBOX 4G MM

NOperating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength �� 850 nm for FOXBOX 4G MM, 1310 nm for FOXBOX 4G SM Data rate �� 4.25 Gbps

Transmission power Singlemode�� -5 dBm, typical Multimode�� -5 dBm, typical

Maximum receiver sensitivity Singlemode�� -18 dBm, typical Multimode�� -12 dBm, typical

Optical loss budget Singlemode�� 13 dB, maximum Multimode�� 7 dB, maximum

Video — FOXBOX 4G VGA Tx/Rx

Signal type��	VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs
Gain ��	Unity
Pixel data bit depth ��	8 bits per channel, 3 channels (R, G, B)
Maximum resolution ��	1600x1200 @ 60 Hz, digitized pixel for pixel; higher resolutions up to
	2048x1120, undersampled

Video input — FOXBOX 4G VGA Tx

Number/signal type��	1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs
Connectors ��	1 female 15-pin HD
Nominal level ��	0.7 Vp-p for RGB
Minimum/maximum levels��	Analog: 0.3 V to 0.75 Vp-p with no offset, terminated
Impedance��	75 ohms
Horizontal frequency��	24 kHz to 100 kHz
Vertical frequency��	40 Hz to 120 Hz
Return loss��	<-40 dB @ 5 MHz

Extron FOXBOX 4G DVI, FOXBOX 4G VGA Series Fiber Optic Transceivers • Specifications