Specifications — ISS 506 Series, cont’d
Sync
Input type | Autodetect RGBHV, RGBS, RGsB | |
Output type | RGBHV, RGBS, RGsB | |
| ||
| of component video (selectable) | |
Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM | |
| Optional SDI/HDSDI input: SMPTE | |
Input level | 0.0 | V to 5.0 |
| 0.0 | V to 0.6 |
Output level | TTL: 5.0 V | |
Input impedance | 510 ohms | |
Output impedance | 75 ohms | |
Max. input voltage | 5.0 | |
Polarity | Positive or negative (selectable) |
Audio
Gain | Unbalanced output: |
Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
THD + Noise | 0.05% @ 1 kHz at +4 dBu and 0 dB gain |
S/N | >83 dB (typical) at maximum output (unweighted) |
Crosstalk | |
Stereo channel separation | >90 dB @ 1 kHz |
CMRR | >75 dB @ 1 kHz |
Audio input
Number/signal type | 6 stereo, balanced/unbalanced |
Connectors | (6) 3.5 mm captive screw connectors, 5 pole |
Impedance | >10k ohms unbalanced/balanced, DC coupled |
Nominal level | +4 dBu (1.23 Vrms), |
Maximum level | +19.5 dBu, (balanced or unbalanced) at 1% THD+N |
Input gain adjustment |
Audio delay compensation (automatic)
20 ms when scaling RGB computer video or HDTV component video
75 ms when scaling NTSC component video,
N0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type | 3 stereo, balanced/unbalanced (2 program, 1 preview) |
Connectors | (3) 3.5 mm captive screw connector, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Gain error | ±0.5 dB channel to channel |
Maximum level | >+21 dBu, balanced or unbalanced at 1% THD+N |
Maximum level (600 ohm) | >+15 dBm, balanced or unbalanced at 1% THD+N |
Control/remote — switcher
Serial control ports | 1 | |
| 1 | |
Baud rate and protocol | 9600 (default), 19200, 38400, 115200 baud; 8 data bits; 1 stop bit; no parity |
2Extron ISS 506 Series Seamless Switchers • Specifications