Extron electronic MLS 103 V, MLS 102 VGA Saving and restoring configurations, Emulation mode

Page 20

Serial Communication, cont’d

Switcher (MLS) Config

The Switcher (MLS) Config screen, shown below, allows you to make adjustments without having to use the front panel controls.

Wait at least 10 seconds between making a change (input selection or audio adjustment) and disconnecting power from the MLS. The switcher needs several seconds to store the new settings in its memory.

In this part of the program you can:

•Set the per-input audio gain or attenuation.

•Set overall volume; this is the same as the User Mode volume adjustment.

•Set the RGB delay period (MLS 102 VGA model only).

•Reset the switcher to factory default settings.

Saving and restoring configurations

The MLS can be configured via RS-232 communication, and the configuration settings can be saved to a file for later use.

1.In the MediaLink Control/Configuration Program, select File, then select Save Configuration as... .

2.Save the file as filename.MLK. An unlimited number of configuration files can be saved as long as each file has a unique file name ending in .MLK.

3.To retrieve the configuration from within the MediaLink Control Program, select File, then select Restore Configuration from... . A set of all the switcher and audio adjustment settings is downloaded into the MLS.

Emulation mode

The MediaLink Control/Configuration Program features an emulation mode so you can set up a MediaLink system before equipment is available on site. In emulation mode a MediaLink Controller is always included in the system. You select which MLS switcher and which control modules will be connected to the MLC. For a stand-alone MLS (without an MLC), connect the MLS directly to the host computer for setup rather than using emulation mode.

You can save the emulated settings to a configuration file, then load that configuration file to the switcher (or switcher and MLC) when equipment is available.

1.

Start the control program by double-

 

clicking on the MediaLnk Control Pgm

 

icon in the Extron Electronics group or

 

folder. The Comm Port Selection

 

screen (shown at right) appears.

2.

Click the Emulate radio button, then

 

click OK. The Initialize Emulated

 

MediaLink Configuration from... dialog box appears.

3.Because you will be creating a brand new configuration, click Cancel instead of selecting a driver file.

The Save Emulated MediaLink Configuration as... dialog box appears.

4-10 MediaLink™ VersaTools© Switchers • Serial Communication

MediaLink™ VersaTools© Switchers • Serial Communication 4-11

Page 19 Page 21
Image 20
Page 19 Page 21
Contents MediaLink VersaTools Switchers User’s ManualFCC Class a Notice PrecautionsExtron’s Warranty Quick Start Guide MLS 100 Series Attach the cables. See the instructions beginning onTable of Contents MediaLink VersaTools Switchers Table of Contents, cont’dOne IntroductionIntroduction InstallationTwo Installation UL/Safety RequirementsMounting the Switchers Tabletop useInstallation, cont’d Rear Panel Features and CablingFurniture or projector mounting Video connectionsAudio connections Aux/Mix Mono audio input all modelsSetting Up Optimal Audio Gain Control and power connectionsTypical Audio Levels For Various Equipment TypesSetup via the MediaLink Control/Configuration Software Gain and Attenuation Settings for MLS 100 Series SwitchersOperation Installation, cont’d Application DiagramsThree Operation Front Panel Features and OperationExecutive mode enabling and disabling front panel buttons Operation, cont’d Troubleshooting MediaLink VersaTools Switchers OperationOperation, cont’d 4ChapterSerial Communication MLC/RS-232 Power port pin assignments Serial CommunicationRS-232 Programmer’s Guide Host-to-MLS communicationsCommand/response table for SIS commands Serial Communication, cont’dControl/Configuration Software for Windows Command/response table for special function SIS commandsInstalling the software Using the control/configuration programUser Mode For stand-alone MLS 100 Series SwitchersSpecial features For MLS 100 Series switchers controlled by an MLCSwitcher MLS Config Saving and restoring configurationsEmulation mode Emulation Configuration dialog box appears Updating firmwareUsing the help program Key to file namesSpecifications, Part Numbers Accessories AAppendix aSpecifications, Part Numbers, and Accessories SpecificationsSpecifications, Part Numbers, Accessories, cont’d Control/remote switcherMediaLink VersaTools Specifications, s, Accessories Audio outputAccessories CablesAdapters Plenum CTL Comm-link cable Part numberInputs Switchable
Related manuals
Manual 25 pages 46.2 Kb

MLS 100 A, MLS 103 SV, MLS 102 VGA, MLS 103 V specifications

Extron Electronics is renowned for its innovative and high-quality AV solutions, and the MLS series, including the MLS 102 VGA, MLS 100 A, MLS 103 SV, and MLS 103 V, exemplifies the company's commitment to excellence in audio-visual integration. These MediaLink Switchers are designed to simplify the management of multiple audio and video sources in classrooms and conference rooms, providing seamless integration and user-friendly operation.

The MLS 102 VGA model focuses on VGA signals, making it a reliable choice for installations that primarily use legacy video sources. It features a simple interface with push-button controls, enabling users to easily switch between two video sources with a single VGA output. This model is ideal for educational environments where older laptops and PCs are still in use.

The MLS 100 A model adds audio capabilities to the mix, offering audio switching along with video. This switcher supports stereo audio signals, allowing educators to present multimedia content effectively. The MLS 100 A simplifies the setup for instructors, enabling them to connect different media sources without complicated wiring or extensive technical knowledge.

The MLS 103 SV and MLS 103 V models elevate functionality with their multi-format switching capabilities. The MLS 103 SV supports both VGA video and stereo audio, while the MLS 103 V is solely focused on video. Both models provide a more comprehensive solution for modern AV requirements. The MLS 103 series employs advanced signal processing technology, ensuring high performance across multiple resolutions and formats.

Additionally, the MLS 103 series incorporates features such as EDID management, which automatically configures the video output to ensure compatibility with a variety of display devices. This eliminates the need for users to worry about the technicalities, enabling a smooth, hassle-free experience.

Scalability is another key characteristic of the MLS series. These devices can be seamlessly integrated with other Extron products, allowing for an expandable AV infrastructure that meets the growing demands of technology in educational and corporate environments.

Durable construction, easy installation, and operation make the MLS series a preferred choice among AV professionals. Whether for a small meeting room or a large lecture hall, Extron's MLS 102 VGA, MLS 100 A, MLS 103 SV, and MLS 103 V models deliver flexibility, reliability, and superior performance, enhancing any audio-visual presentation.
Top Page Image Contents