Specifications — MLS 304 Series, MLS 406 Series (cont’d)
Connectors |
|
MLS 304 Series | 2 pairs of female RCA connectors (inputs |
| 2 female 3.5 mm mini stereo jacks (unbalanced only) (inputs |
| tip (L), ring (R), sleeve (GND) |
| (1) 3.5 mm captive screw connector, 3 pole (Aux/Mix input) |
MLS 406 Series | 3 pairs of female RCA connectors (inputs |
| 1 female 3.5 mm captive screw connector, 5 pole (input 4) |
| 2 female 3.5 mm mini stereo jacks (unbalanced only) (inputs 5, 6); |
| tip (L), ring (R), sleeve (GND) |
| (1) 3.5 mm captive screw connector, |
Impedance |
|
Aux/Mix input | >18k ohms unbalanced, DC coupled |
All other inputs | >10k ohms unbalanced, DC coupled |
Nominal level | |
Maximum level | +8 dBV (10.2 dBu, 2.51 Vrms), unbalanced at <0.1% THD+N |
| +10 dBu (7.28 dBV, 2.45 Vrms), balanced at <0.1% THD+N |
Input gain adjustment |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output — Lineout and Preamp
Number/signal type | 2 (1 Lineout/fixed and 1 Preamp/variable) stereo/mono, balanced/unbalanced |
Connectors | (2) 3.5 mm captive screw connectors, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Gain error | ±0.8 dB channel to channel |
Nominal level | Configurable: |
Maximum level (600 ohm) |
|
Preamp | >+19 dBu, balanced <0.1% THD+N |
Lineout | >+16 dBu, balanced <0.1% THD+N |
Unbalanced wired outputs produce 6 dB of attenuation. Balanced outputs have unity gain/attenuation.
Audio output — mono power amp (MLS 304MA, MLS 406MA only)
Number/signal type | (1) mono |
|
|
Connector | (1) | ||
Sensitivity | |||
Power bandwidth |
|
|
|
Direct (4 ohm) | 20 Hz to 20 kHz, |
| 0.5% THD |
Direct (8 ohm) | 20 Hz to 20 kHz, |
| 0.15% THD |
Transformer (70 V) | 50 Hz to 20 kHz, |
| 1% THD |
........Transformer (100 V) | 50 Hz to 20 kHz, |
| 0.5% THD |
Maximum power output |
|
|
|
Direct (4/8 ohm) | 20 watts max. (continuous) | ||
Transformer (70/100 ..V) 16 watts max. (continuous), transformer coupled | |||
Protection | Input limiting, thermal, short circuit |
Audio output — stereo power amp (MLS 304SA, MLS 406SA only)
Number/signal type | (1) stereo (default) or dual mono (configured via software) | ||
Connector | (1) | ||
Sensitivity | |||
Power bandwidth |
|
|
|
Direct (4 ohm) | 10 Hz to 20 kHz, |
| 0.5% THD |
..................Direct (8 ohm) | 20 Hz to 20 kHz, |
| 0.8% THD |