Extron electronic MTP DA8, MTP DA4 TP cable advantages, Transmission distance, Video Pre-Peak

Page 6

VersaTools® MTP DA4 and MTP DA8, cont’d

The MTP DA inputs a proprietary signal on an RJ-45 connector, buffers it, and distributes four or eight identical proprietary signals on RJ-45 connectors.

The MTP DA does not support the remote power feature of the MTP SV, MTP CV and VTT001. You will have to power the transmitter and all connected receivers.

A contact closure connector on the rear panel provides the ability to mute individual outputs or all outputs.

The MTP DAs are members of the Extron VersaTools® line of basic distribution amplifiers, DAs, transmitters, receivers, and associated video accessories.

The MTPs ship with external desktop 12 V power supplies that accept 100 to 240 VAC, 50 Hz or 60 Hz input.

TP cable advantages

Twisted pair cable is smaller, lighter, more flexible, and less expensive than coaxial cable. Termination of the cable with RJ-45 connectors is simple, quick, and economical.

Transmission distance

The maximum distance for the entire transmission system is determined by the output frequency and resolution and the position of the transmitter’s Pre-Peak switch (if equipped). The total recommended distances are not affected by the presence or absence of an MTP DA in the transmission system. The following sections specify the recommended transmission distances using Extron Enhanced Skew-Free A/V UTP cable or UTP CAT 5 cable, terminated with CAT 5 rated connectors

It is possible to exceed the recommended distance; however, image quality may be reduced.

The DA is designed for and performs best with Extron Enhanced Skew-Free A/V cable terminated in accordance with the TIA/EIA T 568 A wiring standard. CAT 5 cables are acceptable but less preferable. We also recommend the use of pre-terminated and tested cables. Cables terminated on site should be tested before use to ensure that they comply with Category 5 specifications.

The recommendations apply to a complete transmission system, which can include a single transmitter, one or more DAs, and one or more daisy- chained receivers. For example, the maximum suggested range for 1024 x 768 video is 300' with Pre-Peak off in an MTP 15HD system. This suggested range is the same for either of the following two examples:

System 1 components:

System 2 components:

One MTP T 15HD A transmitter

One MTP T 15HD A transmitter

One MTP DA4

One MTP DA8

Four MTP R 15HD A receivers

Four MTP RL 15HD A receivers

 

Four daisy-chained MTP R 15HD receivers

 

 

MTP 15HD A and MTP 15HD RS transmission distances

If you are using the DA as part of an MTP 15HD RS (serial data) transmission system, be aware that the DA routes the serial link one way only, from the transmitter to the receiver(s).

Also, the transmitter and receiver must be jumper configured to pass the serial link one way only. Refer to the MTP 15HD RS user manual.

The table below specifies the recommended transmission distances and transmitter Pre-Peak switch positions for MTP 15HD RGB transmission systems.

Recommended transmission ranges at 60 Hz,

MTP 15HD A and MTP 15HD RS systems

Video

Pre-Peak

Pre-Peak

Max. range

Max. range

format

off

on

(high quality)

(variable quality)

 

 

 

 

 

Composite,

 

 

800'

1000'

S-video,

 

 

(243.8 m)

(304.8 m)

Component

 

 

 

 

640 x 480

<300'

>350'

700'

750'

(91.4 m)

(106.7 m)

(213.4 m)

(243.8 m)

 

800 x 600

<300'

>350'

550'

650'

(91.4 m)

(106.7 m)

(167.6 m)

(198.1 m)

 

1024 x 768

<300'

>350'

500'

600'

(91.4 m)

(106.7 m)

(152.4 m)

(182.9 m)

 

1280 x 1024

<250'

>300'

350'

450'

(76.2 m)

(91.4 m)

(106.7 m)

(121.9 m)

 

1600 x 1200

<250'

>300'

300'

450'

(76.2 m)

(91.4 m)

(91.4 m)

(137.1 m)

 

MTP SV and MTP CV transmission distances

Extron suggests a minimum transmission distance of at least 50 feet. The maximum transmission distance is 1000 feet.

2

VersaTools® MTP DA4 and MTP DA8 • TP Cable Advantages

VersaTools® MTP DA4 and MTP DA8 • Installation

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents VersaTools MTP DA4 and MTP DA8 Precautions Extron’s WarrantyFCC Class a Notice Quick Start Guide VersaTools MTP DA4 and MTP DA8 VersaTools MTP DA4 and MTP DA8 Quick Start Guide QS-1Table of Contents Introduction Typical TP distribution systemVideo Pre-Peak TP cable advantagesTransmission distance Max. range Format OffTermination and Mute Jumpering MTP 15HD Systems Only Video Recommended Format Maximum rangeInstallation Tabletop useRack mounting VersaToools MTPDA4andMTPDA8ConnectionsInstallation ConnectionsFurniture mounting Power supply wiring TP cable terminationFront Panel Power Indicator Skew Delay ProblemsSpecifications Part Numbers RJ-45 connector Part number AccessoriesCables/connectors Enhanced Skew-Free A/V cable Part number

MTP DA4, MTP DA8 specifications

Extron Electronics is a leading manufacturer of high-performance AV distribution systems, and its MTP DA4 and MTP DA8 products exemplify the company's commitment to quality and innovation in the field of audio-visual solutions. These distribution amplifiers, designed for multi-channel applications, offer exceptional performance with their advanced technologies and features tailored to meet professional AV needs.

The MTP DA4 and MTP DA8 are designed to distribute HDBaseT signals over long distances, making them ideal for classrooms, conference rooms, and large venues where reliable signal transmission is crucial. With the capability of supporting resolutions up to 4K, both models ensure that the highest quality video and audio are maintained across all connected displays. This is particularly important in environments that rely on clear and detailed presentations.

One of the standout features of both models is their ability to simultaneously drive multiple outputs while maintaining signal integrity. The MTP DA4 supports four outputs, while the MTP DA8 expands this capability to eight outputs. This allows users to connect multiple displays from a single source without any loss of quality. Additionally, each output is independently buffered, ensuring that signals remain strong and distortion-free.

Technologically, the MTP DA4 and MTP DA8 utilize Extron's proprietary circuitry designed for superior signal processing. With features such as automatic equalization and cable compensation, these devices enhance performance by adjusting to varying cable lengths and types. This means that whether a setup is using standard cable or extended lengths, the MTP DAs ensure optimal signal quality.

Furthermore, both units are equipped with user-friendly features such as LED indicators that provide real-time feedback on power and signal status, making troubleshooting efficient. They also support various input formats, allowing for flexible integration with existing AV systems. The compact design of these distribution amplifiers makes them easy to install in a variety of environments, ensuring that space constraints do not hinder performance.

In summary, the Extron MTP DA4 and MTP DA8 distribution amplifiers offer robust features designed for high-quality AV distribution. Their advanced signal processing capabilities, expandable outputs, and user-friendly design make them ideal solutions for professional audio-visual applications. Whether for educational environments, corporate settings, or live events, these products ensure reliable performance and clarity.
Top Page Image Contents