Extron electronic RCP 2000 Applying and Changing a Switching Effect, Detail adjustments, Cuts

Page 12

Operation, cont’d

Detail adjustments

To apply a horizontal or vertical filter to improve the sharpness of an image, do the following:

1.

Press and release the Detail button. The button lights.

2.

Various levels of detail adjustment are available,

 

depending on the input signal format.

 

•

To change the vertical filter (if available), rotate the V

 

 

adjustment knob. Choose the filter that provides the

 

 

most improvement to the image detail.

 

 

The availability of some filters depends on the type of

 

 

 

 

switcher that is connected. Check your switcher’s user

 

 

manual for to find out if this feature is supported.

 

•

To change the horizontal filter (if available), rotate

 

 

the H adjustment knob. Choose the filter that

 

 

provides the sharpest image.

Applying and Changing a Switching Effect

You can switch the program and preview inputs using a variety of switching effects. For a description of each effect, and the technique to implement it, see the instructions for the effect in this section. Unless otherwise indicated, the effects are available for both the ISS and SGS switchers.

Cuts

A cut seamlessly replaces the program image with the preview image. No effect is applied to the switch. As soon as the Cut button is pressed, the switch occurs.

To switch using a cut, do the following:

1.

Press the preview input button that corresponds to the

 

input that you want to switch to.

2.

Press the Cut button. The seamless switch takes effect

 

immediately, and the preview image becomes the new

 

program image.

Dissolves

A dissolve causes the program image to fade out while the preview image fades in (figure 3-2). See Implementing an effect, later in this chapter, for information on how to implement a dissolve.

Dissolve

Figure 3-2 — A dissolve effect

Changing the duration of a dissolve

To change the duration of a dissolve, do the following:

1.

Press the Dissolve button. The Dissolve button lights.

2.

Rotate the Adjust knob next to the buttons. A duration

 

menu appears on the LCD screen, showing the current

 

duration selected for the dissolve. Select any dissolve

 

duration time from 0.2 to 5.0 seconds.

Wipes (SGS only)

The different types of wipes available on the RCP 2000 are described in this section.

Standard wipe

A standard wipe causes the preview image to appear to unroll over the program image horizontally or vertically. A standard wipe can have either hard (sharp) or soft (fuzzy) edges.

The preview image can have the following transitions (see figure 3-3):

•From left to right

•From right to left

•From top to bottom

•From bottom to top

Figure 3-3 — Standard wipe transitions

3-6

RCP 2000 • Operation

RCP 2000 • Operation

3-7

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Remote Control Panel RCPExtron’s Warranty FCC Class a NoticeQuick Start Guide RCP Table of Contents Table of Contents, cont’d OneIntroduction Installation FeaturesTwo Introductionroduction, cont’dInstallationtal ation, cont’d Rear Panel Connectors InstallationInstallation, cont’d Application Example Making an RCP Communication CableRCP 2000 to ISS 108/408, SGS 408 RS-232 link RCP 2000 to ISS 108/408 Ethernet linkInstallation, cont’d ThreeOperation Operationration, cont’d Top Panel Controls RCP 2000 top panelUsing the Picture Controls Operation, cont’dApplying and Changing a Switching Effect Detail adjustmentsCuts DissolvesCurtain wipe effects Resetting the Unit Implementing a titleImplementing an effect Remote Control FourRemoteControl,cont’d Manual IP Setup Changing the IP addressesRemote Control, cont’d Network IP Setup and Control Accessing and using the Web pagesEstablishing or changing system settings Contacting the RCP unitRemote Control, cont’d Firmware upgradeNetwork Switcher Control Accessing network switcher controlFile management Specifications, Parts, Accessories Using network switcher controlAAppendix Specifications,Parts,andandAccessories,cont’d Control/remote control panelPart Numbers GeneralSpecifications, Parts, and Accessories, cont’d Specifications, Parts, and Accessories, cont’d
Related manuals
Manual 27 pages 36.73 Kb

RCP 2000 specifications

The Extron RCP 2000 is a prominent tool in the realm of control systems, designed to enhance user experience in various environments, including educational institutions, corporate settings, and large venues. This remote control panel is engineered for streamlined operation of audio-visual equipment, serving as an indispensable component in managing multimedia presentations.

One of the main features of the RCP 2000 is its intuitive interface. Equipped with a backlit, tactile keypad, users can easily find and operate functions even in low-light settings. The ergonomic layout provides quick access to essential controls, such as volume adjustments, source selection, and macro commands, ensuring a user-friendly experience. The inclusion of customizable buttons allows for flexibility, enabling users to tailor the panel to their specific needs.

Another notable characteristic is its support for a wide range of audiovisual technologies. The RCP 2000 is compatible with Extron's extensive line of products and integrates seamlessly with other equipment, facilitating a cohesive system. This compatibility is further enriched by the device’s ability to support IP-based control, allowing for remote monitoring and programming, which is crucial for managing complex AV systems across multiple locations.

The RCP 2000 also features robust connectivity options, including Ethernet for network integration and RS-232 ports for direct control of hardware devices. This versatility enhances its functionality and ensures compatibility with many modern AV systems. Additionally, the panel supports multiple control protocols, making it adaptable to varied environments and distinct user preferences.

In terms of build quality, the Extron RCP 2000 maintains a high standard. It is constructed from durable materials, designed to withstand daily usage while maintaining its aesthetic appeal. Its compact design allows for easy installation, whether mounted on walls or placed on tables, making it a practical option for space-constrained areas.

In summary, the Extron RCP 2000 stands out with its user-friendly interface, extensive compatibility with audiovisual technologies, and robust construction. These features make it an ideal choice for efficient AV management, ensuring that users can focus on delivering impactful presentations without the hassle of complex control systems.
Top Page Image Contents