Installation and Operation

Installation Overview

To install and set up the YCS SW2, follow these steps:

1Mount the YCS SW2 on a rack shelf, furniture, or projector if desired.

Rack mounting

For optional rack mounting, do not install the rubber feet. Mount the switcher on a 19” wide 1U VersaTools® rack shelf (Extron part #60-190-20 or 60-604-20), a standard 1U Universal or Basic rack shelf (Extron part #60-190-01 or 60-604-01), or

Connect your composite video and/or S-video input source(s) to one or both YCS input connectors.

a Universal or Basic 1U 6-inch Deep Rack Shelf (Extron part #60-190-10 or 60-604-10).

3Connect your output device(s) to the YCS composite video and/or S-video output connector(s).

4Wire the provided 2-pin captive screw connector to the external power supply. (See Wiring the Power Connector, later in this chapter.)

5If using autoswitching, insert the provided 5-pin captive screw plug into the 5-pin connector on the YCS back panel, and jumper-connect pins 4 and 5 together. (See Autoswitching, later in this chapter.)

6If using contact closure for input selection, connect a two- button remote contact closure device to pins 1, 2, and 3 of the captive screw connector on the YCS rear panel. (See Contact Closure, later in this chapter.)

7Apply power to the YCS SW2 and to the input and output devices.

Mounting the YCS SW2

The YCS SW2 can be set on a table; mounted on a rack shelf; mounted under a desk, podium, or table; or attached to a projector.

Tabletop use

Four self-adhesive rubber feet are included with the YCS SW2. For tabletop use, attach one foot at each corner on the bottom of the unit, and place the YCS in the desired location.

Mounting on a standard or VersaTools rack shelf

1.	If feet were previously attached to the bottom of the YCS,
	remove them.
2.	Mount the YCS SW2 on the rack shelf, using two 4-40 x
	3/16” screws in opposite (diagonal) corners to secure the
	unit to the shelf (see ﬁgure 2-1, below).
3.	Install blank panel(s) or other unit(s) on the rack shelf as
	desired.

VersaTools Rack Shelf

1/4 Rack Width Front

False Faceplate

Use 2 mounting holes on

opposite corners.

(2) 4-40 x 3/16" Screws

Figure 2-1 — Mounting a YCS SW2 (with other units) on a VersaTools rack shelf

2-2

YCS SW2 • Installation and Operation

2-3

YCS SW2 specifications

The Extron YCS SW2 is a state-of-the-art analog audio matrix switcher designed to address the complex audio switching needs within professional AV environments. As part of Extron’s commitment to innovation in AV technology, the YCS SW2 offers a robust solution for seamless audio management in various settings, including educational institutions, corporate boardrooms, and event spaces.

One of the standout features of the YCS SW2 is its ability to accommodate multiple audio sources. The switcher supports up to 12 inputs, enabling users to connect various devices such as microphones, mixers, and media players. This flexibility ensures that users can easily integrate a wide range of audio sources into their setups, facilitating dynamic presentations and discussions.

The YCS SW2 utilizes Extron’s proprietary technology known as the "YCS" or "Yearless Configuration System," which allows for extensive control features. With this system, users can define and customize audio routing profiles, ensuring that the right audio sources are directed to the appropriate outputs at any given time. This level of customization is essential for environments where audio requirements frequently change or when specific routing configurations are necessary for particular events.

Another significant characteristic of the YCS SW2 is its user-friendly interface. The switcher is equipped with an intuitive control panel, featuring tactile buttons and a clear LED indication system. This design ensures that operators can quickly and easily navigate through the switcher's functionality, minimizing the learning curve and enhancing operational efficiency.

Audio performance is further bolstered by the YCS SW2’s integrated audio processing capabilities. The switcher includes features such as adjustable gain control, equalization, and other signal enhancements that can optimize the audio output quality. This ensures that audio signals remain clear and professional-grade, whether the context is a presentation, a lecture, or a live event.

In terms of connectivity, the YCS SW2 provides convenient options for both analog and digital standards, ensuring compatibility with a wide range of existing AV equipment. This flexibility in connectivity options simplifies integration, making it easier for users to incorporate the switcher into their current infrastructure.

In conclusion, the Extron YCS SW2 represents a remarkable advancement in analog audio switching technology, combining versatile input options, an intuitive control interface, and advanced audio processing capabilities. These features collectively enhance its functionality, making it a vital tool for professionals aiming to deliver exceptional audio experiences in diverse AV environments. Whether for educational use or corporate applications, the YCS SW2 is poised to meet the demands of modern audio management with reliability and ease.