Extron electronic VSW 2VGA A user manual Under-desk mounting, Through-desk mounting

Page 16

Installation and Operation, cont’d

Under-desk mounting

1.Attach the under-desk mounting brackets (MBU 125, part #70-077-01) to the VSW 2VGA A with the four provided machine screws, as shown in figure 2-3.

Figure 2-3 — Under-desk mounting brackets

2.Hold the switcher with attached brackets against the mounting surface. Use a soft pencil to mark the location of holes for screws on the desk or other furniture.

3.Drill 1/4 inch (6.4 mm) deep, 3/32 inch (2 mm) diameter pilot holes in the table or desk at the marked screw locations from the underside/inside (concealed side) of the furniture, where the switcher will be located.

4.Attach the VSW 2VGA A to the desk with the provided wood screws.

Through-desk mounting

1.Hold the front panel of the switcher against the furniture. Use a soft pencil to mark the rough-in opening on the desk. The opening, 1.125 inch x 4.425 inch (2.8 cm x 11.2 cm) will be slightly larger than the switcher enclosure.

2.Cut out the material from the rough-in area with a jigsaw. Check the opening size by inserting the switcher part way through the hole. If needed, use a saw, file, or sandpaper to enlarge the hole. Smooth the edges of the hole with sandpaper.

2-6 VSW 2VGA A • Installation and Operation

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Input, 1-output VGA and Audio Switcher VSW 2VGA aPrecautions s Page Table of Contents Table of Contents, cont’d One About this Manual About the VSW 2VGA aDaisy Chaining the VSW 2VGA a Expandable, economical presentation chain forIntroduction, cont’d Features Two Installation Overview Mounting the VSW 2VGA aRack shelf mounting UL rack mounting guidelinesInstallation and Operation, cont’d 60-190-10Mounting the VSW 2VGA a on a standard 1U rack shelf Under-desk mounting Through-desk mountingThrough-desk mounting VSW 2VGA a Rear Panel Features Power supply to the 2-pole, 3.5 mm captive screw connectorSetting the VSW 2VGA a Jumpers AutoswitchingRemoving the cover 11 Jumper positions Power connection 12 shows how to wire the power connectorUsing the VSW I AAP Input selectionDaisy chain configuration Internal Jumper SettingsLoop configuration example 14 Loop configuration Tree configuration example Projector Internal Jumper Settings Installation and Operation, cont’d AAppendix a Specifications VideoVideo input and loop through Video outputSync AudioAudio input Audio outputControl/remote switcher GeneralAccessories Included PartsSpecifications, Part Numbers, Accessories, cont’d Cable Accessories Part numberVSW 2VGA a Specifications, Part Numbers, and Accessories Specifications, Part Numbers, Accessories, cont’d Extron Warranty USA, Canada, South America Japan Central AmericaExtron Electronics. All rights reserved
Related manuals
Manual 2 pages 16.76 Kb

VSW 2VGA A specifications

Extron Electronics has long been recognized for its innovation and reliability in the world of AV technology. One of its standout products, the VSW 2VGA A, exemplifies the company’s commitment to providing high-quality video switching solutions. The VSW 2VGA A is a versatile and efficient two-input VGA switcher designed for applications where seamless transitions between different VGA sources are essential.

The device supports resolutions up to 1920x1200, ensuring crisp and clear image quality for both computer and video presentations. This capability makes it an ideal choice for educational settings, conference rooms, and corporate environments where visual clarity is paramount. The switcher employs advanced signal processing technologies that preserve the integrity of the signal, minimizing any risk of degradation that can occur during switching.

One of the defining features of the VSW 2VGA A is its user-friendly interface. It includes intuitive front panel controls along with a straightforward LED status indicator that visually communicates the active input source. This simplicity extends to remote control options, as the VSW 2VGA A can also be operated via an optional RS-232 interface, allowing integration with existing control systems for enhanced automation.

The switcher is designed with versatility in mind. It includes both standard VGA inputs and outputs, making it compatible with a wide variety of devices, from laptops and desktop computers to projectors and display screens. This feature is critical for environments where multiple devices may be used in tandem, facilitating easy switching without the hassle of connecting and disconnecting cables.

The build quality of the VSW 2VGA A is robust, ensuring durability in frequent use. The compact design allows for easy installation in various settings, whether mounted on a rack or positioned on a tabletop. Additionally, the device is engineered to minimize power consumption, aligning with contemporary demands for energy-efficient technology solutions.

In conclusion, Extron's VSW 2VGA A is a reliable and efficient VGA switching solution that integrates advanced technologies, impressive features, and user-friendly characteristics. Whether in a classroom, conference room, or multimedia environment, it provides an essential tool for managing video sources effectively, ensuring that presentations run smoothly and professionally.
Top Page Image Contents