Extron electronic SW12 VGA ARS, SW8/12 VGA manual Extron’s firmware loader screen

Page 32

9. On the Choose Firmware File window, double-click on the new firmware file to open it. The Choose Firmware File window closes, and the path to the selected firmware file is displayed in the “Select a firmware file” field on the firmware file selection screen.

Figure 3-7 — Extron’s firmware loader screen

10. Click the Upload button. A status bar, which shows the progress of the upload, appears in the Firmware Loader window. The firmware upload to the switcher may take several minutes. Once the status bar has progressed fully from left to right, the firmware loader utility resets the switcher.

In addition, messages appear on the firmware file selection window indicating when the unit is uploading the firmware, then resetting itself.

When the firmware upload process is completed, the message “Transfer Complete!” is displayed, and the new firmware version number appears in the Current Unit Information field.

11. Click Exit to close the Firmware Loader.

SW8/12 VGA Ars • Control 3-9

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Computer Video and Audio Switchers SW8/12 VGA ArsPrecautions Safety Instructions EnglishConsignes de Sécurité Français Sicherheitsanleitungen DeutschFCC Class a Notice Table of Contents Table of Contents, cont’d One About the SW8/12 VGA Ars Switchers IntroductionAbout This Manual SW8/12 VGA Ars IntroductionFeatures Introduction, cont’d Two Installation and Operation Mounting the SW8/12 VGA Ars SwitcherDesktop placement Rack mountingRack mounting the switcher Mounting instructionsApproximately 1/4 6.4 mm of the screws head is protruding Mounting under a desktopDrill 1/4 6.4 mm deep, 3/32 2 mm diameter pilot holes from Mounting the switcher through a desktop Mounting through a desktopRear Panel SW8 VGA Ars rear panelComputer video input connections Power connectionCable Connections Video output connections Pin Name Connection 5mm Stereo ConnectorAudio input connections Remote control connection Audio output connections10 SW8/12 VGA Ars Installation and Operation VSW I AAP connection15 a typical switcher application with VSW I AAP units Front of the VSW I AAPIR 102 remote control connection 12 SW8/12 VGA Ars Installation and OperationFront Panel Hold Press Description and ResultOperating the SW8/12 VGA Ars Switchers 14 SW8/12 VGA Ars Installation and OperationThree Remote Control via Simple Instruction Set SIS\⤀ Switcher-initiated unsolicited\⤀ messagesPin RS-232 Description RS-232 Control Port Connector ControlError responses TimeoutUsing the command/response table Symbol definitionsCommand Ascii Telnet\⤀ Response Additional description Control, cont’dCommand/Response Table for SIS commands \⤀ Command Ascii Telnet\ ⤀ Response Additional descriptionUpdating Firmware Downloading the firmwareLoading the firmware to the switcher \Program Files\Extron\FWLoaderExtron firmware loader screen Extron’s firmware loader screen 10 SW8/12 VGA Ars Control Specifications, Part Numbers, Accessories SW8/12 VGA Ars Specifications, Part Numbers, Accessories Specifications, Part Numbers, AccessoriesSpecifications Audio Specifications, Part Numbers, Accessories, cont’d Part Numbers and Accessories SW8/12 VGA Ars switchersAccessories Included partsSpecifications, Part Numbers, Accessories, cont’d Extron’s Warranty Tron USA West
Related manuals
Manual 41 pages 31.09 Kb
Top Page Image Contents