Extron electronic SW MTP T 15HD A Series Video input, Audio input, Audio output, General

Page 3

MTP - Mini Twisted Pair Series

SW MTP T 15HD A Series

SPECIFICATIONS

Video

Number / Signal type. . . . . . . . . . . 1 set of proprietary analog signals

Connectors.. . . . . . . . . . . . . . . . . . . . . . . 1 female RJ-45

Video input

Number / Signal type. . . . . . . . . . . 2, 4, or 6 (depending on the model) analog VGA-UXGA RGBHV, RGBS, RGsB, component video, S-Video or composite video

Connectors.. . . . . . . . . . . . . . . . . . . . . . . 2, 4, or 6 (depending on the model) female 15-pin HD

Nominal level.. . . . . . . . . . . . . . . . . . . . 1 Vp-p for Y of component video and S-video, and for composite video 0.7V p-p for RGB and for R-Y and B-Y of component video

0.3V p-p for C of S-video

Minimum / Maximum levels. . . Analog: 0.3 V to 1 Vp-p with no offset Impedance. . . . . . . . . . . . . . . . . . . . . . . . 75 ohms

Horizontal frequency. . . . . . . . . . . . 15 kHz to 130 kHz

Vertical frequency. . . . . . . . . . . . . . . 30 Hz to 150 Hz

Return loss.. . . . . . . . . . . . . . . . . . . . . . . <-30 dB @ 5 MHz

DC offset (max. allowable). . . . . . . 2 V

Video output refer to twisted pair receivers’ specifications and manuals

Sync

Input type

RGBHV, RGBS, RGsB

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Input level

2.5 V to 5.5 V

Input impedance

560 ohms

Max input voltage

5.5 V

Audio

 

Number / Signal type

1 set of proprietary analog signals

Connectors

1 female RJ-45

Gain

0 dB (unbalanced), +6 dB (balanced)

Frequency response

20 Hz to 20 kHz, ±1 dB

THD + Noise

0.01% @ 1 kHz, 0.03% @ 20 kHz

S/N

>75 dB at maximum output, unweighted

Crosstalk

<-70 dB,@ 20 Hz to 20 kHz, +4 dBu stereo output

Stereo channel separation

>62 dB @ 20 Hz to 20 kHz

CMRR

>43 dB @ 20 Hz to 20 kHz

Audio input

 

Number / Signal type

2, 4, or 6 (depending on the model) stereo, unbalanced

Connectors

2, 4, or 6 (depending on the model) 3.5 mm mini audio jacks (tip, ring, sleeve)

Impedance

>10k ohms unbalanced

Nominal level

-10 dBV (316 mVrms)

Maximum level

+15 dBV, unbalanced, at <1% THD+N

NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output

 

Number / Signal type

1 set of proprietary analog signals to be sent to an MTP receiver

 

1 stereo, balanced/unbalanced

Connectors

1 female RJ-45 (for proprietary signals)

 

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced (for the stereo output)

Gain error

±1 dB channel to channel (for stereo output)

Maximum level (Hi-Z)

>+23 dBu, balanced, at <1% THD+N (for stereo output)

Maximum level (600 ohm)

>+17 dBu, balanced at <1% THD+N (for stereo output)

Stereo channel separation

>60 dB @ 1 kHz

Control / remote — switcher / transmitter

Serial control port.. . . . . . . . . . . . . . . RS-232, 9-pin female D connector (shared with contact closure) Baud rate and protocol. . . . . . . . . 9600 baud, 8 data bits, 1 stop bit, no parity

Serial control pin

configurations.. . . . . . . . . . . . . . . . . . . 2 = TX, 3 = RX, 5 = GND

Contact closure.. . . . . . . . . . . . . . . . . . RS-232, 9-pin female D connector (shared with serial control) Contact closure pin

configurations.. . . . . . . . . . . . . . . . . . . 1 = input 1, 4 = input 2, 5 = GND, 6 = input 3, 7 = input 4, 8 = input 5, 9 = input 6

Program control.. . . . . . . . . . . . . . . . . Extron’s control/configuration program for Windows® Extron’s Simple Instruction Set (SIS)

General

Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supplied by an external power supply

NOTE: The SW MTP Series transmitters cannot supply remote power to or receive remote power from attached receivers.

External power supply

100 VAC to 240 VAC, 50/60 Hz, external, to 12 VDC, 2 A, regulated

Power input requirements

12 VDC, 0.6 A

Temperature / Humidity

Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing

 

Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing

Cooling

Convection, unvented

Rack mount

Yes, with optional 1U, 9.5” deep rack shelf, part #60-190-01 or 60-604-01; or

 

VersaTools® 3” deep rack shelf, part #60-190-20 or 60-604-20.

Also furniture

 

Enclosure type

Metal

Enclosure dimensions

1.75" H x 8.75" W x 3.0" D (1U high, half rack wide)

 

4.4 cm H x 22.2 cm W x 7.6 cm D

 

(Depth excludes connectors and toggle switch.)

Product weight

0.8 lbs (0.4 kg)

Shipping weight

3 lbs (2 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Listings

UL, CUL

Compliances

CE, FCC Class A, VCCI, AS/NZS, ICES

MTBF

30,000 hours

Warranty

3 years parts and labor

NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.

94

usa West

usa east

www.extron.com

+1.714.491.1500 / +800.633.9876

+1.919.863.1794 / +800.633.9876

© 2008 Extron Electronics. All rights reserved.

+1.714.491.1517 FAX

+1.919.863.1797 FAX

Pricing and specifications may change without notice.

Image 3
Contents SW MTP T 15HD a Series SW6 MTP T 15HD a Unique FeaturesSW2 MTP T 15HD a SW4 MTP T 15HD aAudio Control / remote switcher / transmitterVideo Video input

SW MTP T 15HD A Series specifications

Extron Electronics SW MTP T 15HD A Series is an advanced, high-performance transmitter designed for seamless and reliable distribution of HD and 4K video signals over twisted pair cabling. This innovative device stands out in the realm of audio-visual solutions, offering an integrated approach that meets the demands of modern AV applications in corporate, educational, and entertainment environments.

One of the main features of the SW MTP T 15HD A Series is its ability to transmit high-definition video signals up to 4K resolution at 60 frames per second, ensuring crystal-clear image quality. This capability is critical for presentations and events where visual clarity is paramount. The device supports a wide range of video formats, including HDMI, and allows for deep color and high dynamic range (HDR), enhancing the viewing experience.

The SW MTP T 15HD A Series utilizes Extron’s advanced transmission technologies, ensuring the secure and efficient transfer of signals. The product is equipped with EXTRON’s patented EDID Minder, a feature that maintains the optimal video display settings for connected devices, facilitating an uninterrupted user experience. Additionally, the device incorporates HDCP compliance, which ensures compatibility with protected content, safeguarding the integrity of video transmission.

Another significant characteristic of this device is its ease of integration and installation. The compact design and lightweight form factor make it suitable for various mounting scenarios, whether in rack systems or discreet locations. With support for Power over Ethernet (PoE), the SW MTP T 15HD A Series simplifies cabling requirements by eliminating the need for separate power supplies, streamlining setup and configuration.

The SW MTP T 15HD A Series also provides robust diagnostics and status monitoring features. These capabilities assist in troubleshooting and ensuring reliable operation over long distances. The user-friendly interface allows for simple management and customization of settings, making it accessible for both seasoned AV professionals and newcomers.

In conclusion, the Extron Electronics SW MTP T 15HD A Series is a reliable and versatile solution for transmitting high-definition video signals over twisted pair cabling. Its impressive features, advanced technologies, and user-friendly design make it an ideal choice for various AV applications, ensuring high-quality performance and seamless integration into existing systems. With its future-ready capabilities, this series is built to meet the evolving needs of modern AV environments.