Extron electronic SW AV manual Audio

Page 45

Audio

Gain

Adjustable

 

When gain is set to unity (0 dB), balanced output from captive screw

 

connectors or unbalanced output from RCA connectors will have a 0 dB

 

gain; unbalanced output from captive screw connectors will be attenuated

 

by 6 dB.

Frequency response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

<0.04% @ 1 kHz at nominal level

S/N

>90 dB at maximum output (unweighted)

Audio input Number/signal type

SW 6/8/12V, SW 4/6/8/12AV, SW 6/8/12 SV, SW 4/6/8/12SVA, SW 6/8/12A

4, 6, 8, or 12 (depending on the model) stereo, balanced/unbalanced SW 4/6/8/12AV RCA, SW 4/6/8/12SVA RCA, SW 6/8/12A RCA

4, 6, 8, or 12 (depending on the model) stereo, unbalanced

Connectors

SW 6/8/12V, SW 4/6/8/12AV, SW 6/8/12 SV, SW 4/6/8/12SVA, SW 6/8/12A

4, 6, 8, or 12 (depending on the model) 3.5 mm captive screw connectors, 5 pole

SW 4/6/8/12AV RCA, SW 4/6/8/12SVA RCA, SW 6/8/12A RCA

8, 12, 16, or 24 (depending on the model) RCA female

Impedance

>25k ohms unbalanced, 50k ohms balanced, AC/DC coupled

Nominal level

+4 dBu (1.23 Vrms), 0 dBu (0.775 Vrms), -10 dBV (316 mVrms), -20 dBV

 

(100 mVrms), configurable

Maximum level

>+15 dBu, (balanced or unbalanced) at 1% THD+N

Input gain adjustment

–18 dB to +24 dB, adjustable per input

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu.

Audio output

Number/signal type

SW 6/8/12V, SW 4/6/8/12AV, SW 6/8/12 SV, SW 4/6/8/12SVA, SW 6/8/12A 2 stereo, balanced/unbalanced

SW 4/6/8/12AV RCA, SW 4/6/8/12SVA RCA, SW 6/8/12A RCA 1 stereo, unbalanced

1 stereo, balanced/unbalanced

Connectors

SW 6/8/12V, SW 4/6/8/12AV, SW 6/8/12 SV, SW 4/6/8/12SVA, SW 6/8/12A

(2) 3.5 mm captive screw connectors, 5 pole

SW 4/6/8/12AV RCA, SW 4/6/8/12SVA RCA, SW 6/8/12A RCA

2 RCA female

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.1 dB channel to channel

Nominal level

+4 dBu (1.23 Vrms), 0 dBu (0.775 Vrms), -10 dBV (316 mVrms), -20 dBV

 

(100 mVrms), configurable

Maximum level (Hi-Z)

>26 dBu, balanced; >+20 dBu, unbalanced at 1% THD+N

Maximum level (600 ohm)

>21 dBm, balanced; >+15 dBm, unbalanced at 1% THD+N

SW AV Series Switchers • Specifications and Part Numbers

A-3

Image 45
Contents SW AV Series Precautions SW AV Series Switchers Quick Start QS-1 Quick Start SW AV Series SwitchersQuick Start SW AV Series Switchers, cont’d Table of Contents Table of Contents, cont’d One Features About the SwitchersVideo switchers Introductiontroduction, cont’dInputs Outputs Model Captive SW AV Series Switchers IntroductionVideo Screw Audio All video modelsCaptive screw connector a models Audio switchersRCA connector a RCA models All audio modelsAll switcher models Introduction, cont’d Two Installationstallation, cont’d Installation OverviewMounting the Switcher Cabling and Rear Panel Views Mounting the switcherInstallation, cont’d Video input and output connections video models onlyAudio input and output connections audio models only Captive screw connector wiring for audio inputs External sync connection Remote connectionSimple external sync connection example Power connectionInstallation, cont’d Three Front Panel Controls and Indicators SW AV Series Switchers OperationOperationeration, cont’d SW 8A front panel Operation, cont’d Input selection controls and indicatorsAutoswitch mode controls and indicator video switchers Audio controls and indicators audio switchersPower Executive mode controls and indicatorSwitching inputs Front Panel OperationsExample 1 Select an input Example 2 Select a video input only video and audio switcherVideo switchers must be in normal mode Adjusting audio gain and attenuation audio switchersNot increment or decrement the audio level Example 4 Adjust the audio levelExample 4, step E Adjusting the audio level Switch mode Audio level reset single inputAudio level reset all inputs Optimizing the Audio Audio Switchers Executive mode front panel security lockoutMemory Troubleshooting If no Image Appears Operation, cont’d Four SW AV Series Switchers Remote Control Host-to-switcher communicationsRemoteControl,cont’d Simple Instruction Set ControlError responses Switcher-initiated messagesTimeout Using the command/response tableRemote Control, cont’d Symbol definitionsCommand Ascii Command Response Additional description Resets Installing the software Using the softwareWindows-Based Program Control Infrared Remote Control Using the help systemContact Closure Control SW 4 and SW 6 Models Only Remote Control, cont’d AAppendix a Specifications and Part NumbersSW AV Series Switchers Specifications and Part Numbers Specificationsecifications, cont’dAudio Control/remote switcher Specifications, cont’dSwitcher Optional accessoriesCables Extron PartBulk cables Super High Resolution Cable Super High Resolution CableFCC Class a Notice Extron’s Warranty Extron Electronics, USA