Front Panel Features

6.(Optional) Enable auto-input switching. Attach the 5-pole

captive screw plug to the Remote connector (G on the rear panel diagram on the previous page) if this was not done in

step 5 for the RS-232 connection. Use a jumper wire to short pins 4 and 5 of the shared plug together (see the illustration at right).

When auto-input switching is in effect, the green Auto Switch LED on the front panel lights (A on the diagram below).

7.If necessary, wire a 2-pole captive screw connector (provided) to your Extron power supply as shown below.

	7/8”
Heat	(22 mm)	Captive Screw Connector
Heat	1/8”
Shrink	1/8”
Shrink	(3 mm)
	(3 mm)
	3/16”	Tie Wrap
	(5 mm) Max.	Tie Wrap
	(5 mm) Max.

ATTENTION: • The power supply must not be permanently fixed to the building structure or similar structures.

•The power supply must not be located within environmental air handling spaces or the wall cavity.

8.Set the rear panel EDID DIP switch (switch 1, on the left) as follows:

EDID DEFAULT

EDID

STORE

STORED

REMOTE
	AUTO
RS	-232

•Set the switch to Stored (down) if you want to store the EDID (resolution, refresh rate, and clocking rate) of the connected display at the SW2 DP output (see the illustration at right), then press the recessed EDID Store button. The EDID LED flashes amber, then lights steadily green when the EDID has been stored.

•Set the switch to Default (up) to select the Extron DisplayPort default EDID of 1920x1080 @ 60 Hz with 2-channel audio.

NOTE: DIP switch 2 (on the right) is not functional.

9.Power on the output display.

10.Connect power to the switcher.

11.Power on the source devices.

EDID

DEFAULT

EDID

STORE

STORED

	AUTO	INPUTS
	SWITCH	INPUTS
	SWITCH
	1	2
	CONFIG

INPUTS OUTPUT

SIGNAL

HDCP

SW2 DP

DISPLAYPORT SWITCHER

AAuto Switch LED

BInput Selection buttons

CSignal Status LEDs

DHDCP Status LEDs

EUSB Config port

Extron Headquarters		Extron Europe	Extron Asia	Extron Japan	Extron China	Extron	Extron Korea	Extron India
+800.633.9876 Inside USA/Canada Only		+800.3987.6673	+800.7339.8766		+4000.EXTRON	Middle East		1800.3070.3777
		Inside Europe Only	Inside Asia Only	+81.3.3511.7655	+4000.398766		+82.2.3444.1571	Inside India Only
Extron USA - West	Extron USA - East			+81.3.3511.7656 FAX	Inside China Only	+971.4.2991800	+82.2.3444.1575 FAX
+1.714.491.1500	+1.919.850.1000	+31.33.453.4040	+65.6383.4400			+971.4.2991880 FAX		+91-80-3055.3777
+1.714.491.1517 FAX	+1.919.850.1001 FAX	+31.33.453.4050 FAX	+65.6383.4664 FAX		+86.21.3760.1568			+91 80 3055 3737 FAX
					+86.21.3760.1566 FAX

© 2012 Extron Electronics	All rights reserved. www.extron.com	68-2245-50 Rev. A
		68-2245-50 Rev. A
2		06 12

SW2 DP specifications

The Extron SW2 DP is a state-of-the-art 2x1 DisplayPort switcher designed to facilitate seamless switching between two DisplayPort sources for a single DisplayPort display. This compact and versatile device is particularly useful in environments like classrooms, conference rooms, and and digital signage applications where multiple video sources need to be connected to a singular output.

One of the standout features of the SW2 DP is its ability to support high-resolution video signals, delivering crisp video quality at resolutions up to 4K at 60Hz. This ensures that users can enjoy stunning visuals without any degradation in quality, making it ideal for high-performance tasks such as presentations, video conferences, and graphic design.

The SW2 DP is built with advanced digital switching technology that guarantees fast and reliable source switching, which reduces the latency often associated with traditional switching methods. This ensures that users do not experience interruptions while switching between sources, maintaining a smooth and professional flow during presentations.

It also incorporates Extron's exclusive EDID Minder technology. This feature manages the communication between the source and the display, ensuring that optimal video parameters are always set for the connected devices, which is essential for maintaining quality visuals over HDMI or DisplayPort connections.

The device is designed for ease of use, with a user-friendly interface that includes front-panel buttons for manual source selection. In addition, the SW2 DP is equipped with an RS-232 port, allowing for integration with third-party control systems. This facilitates remote control and automation, fitting seamlessly into existing AV setups.

Moreover, the SW2 DP is compatible with the Extron's extensive range of other AV components, showcasing its flexibility within a broader AV system architecture. With robust construction and reliable performance, the SW2 DP stands out as a vital component for any professional or educational setting requiring versatile video source management.

In summary, the Extron SW2 DP DisplayPort switcher offers a combination of high performance, advanced features, and seamless integration options. Its ability to handle high-resolution signals while providing reliable switching makes it an essential tool for anyone looking to enhance their AV experience. Whether for education, video conferencing, or digital signage, the SW2 DP meets the demands of modern AV applications effectively.