Extron electronic SW8, SW6 setup guide Rear Panel Features and Connections, Installation Steps

Page 1

SW6 HDMI and SW8 HDMI • Setup Guide

The Extron SW6 and SW8 HDMI are six and eight input, one output, High-definition Multimedia Interface (HDMI) switchers. They allow multiple HDMI signals, including digital video, 3D signals, and embedded multi-channel digital audio, to be switched to one compatible display. These switchers support all standard single link HDMI (up to 2.25 Gbps) and DVI 1.0 signal formats and are compatible at 60 Hz with all PC resolutions up to 2048 x 1080 and HDTV resolutions up to 1080p with 12-bit color. They are fully HDCP compliant.

This guide provides instructions for an installer to set up and operate these switchers. For full installation, configuration, and operation details, see the SW HDMI Series User Guide, available at www.extron.com.

Rear Panel Features and Connections

NOTE:

Figure 1 shows an SW8 HDMI, which has eight input connectors. The rear panel of the SW6 HDMI is identical except

for the number of input connectors (six).

6

100-240V

0.3A MAX

INPUTS

OUTPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

+V

5

6

7

8 +V

1

 

 

 

 

 

 

TALLY OUT

2

3

4

5

6

7

8

CONTACT

1

2

3

4

G

5

6

7

8

G

50-60Hz

1

 

 

 

 

3

4

2

Figure 1. SW8 HDMI Rear Panel

 

 

 

 

 

A Female IEC power connector

 

 

D Contact closure port

 

B HDMI input connectors

 

 

E RS-232 and auto-input switching connector

C HDMI output connector

 

 

F Tally Out port

 

SW8 HDMI

REMOTE

RS-232 AUTO

Tx Rx G

5

Installation Steps

1.Turn off all of the equipment and disconnect it from the power source.

2.Mount the switcher on a rack shelf or furniture (optional. See the SW HDMI Series User Guide for the procedure).

3.Connect HDMI input sources to one or more of the SW HDMI input connectors (B on the rear panel diagram in figure 1).

NOTE:

LockIt® cable lacing brackets, one for each HDMI input and output connector, are provided with the SW HDMI.

These brackets can be used to secure the HDMI cables to the rear panel connectors to reduce stress on the HDMI

connectors and prevent signal loss due to loose cable connections. For information on attaching the LockIt brackets,

see the SW HDMI Series User Guide, available at www.extron.com.

4.Connect an HDMI output device to the output connector (C). By default, the EDID of this device is stored at the HDMI inputs.

5.Connect control devices: Connect your computer to one of the following SW HDMI communication ports to configure and control the switcher via SIS commands:

zz RS-232 port — Connect the unterminated transmit, receive, and ground wires of the RS-232 cable to the first three pins on the provided 5-pole captive screw plug, as shown in the illustration at right. Connect the plug to the rear panel Remote

shared connector (E in figure 1), and the other end of the cable to your computer serial port. Protocol for the RS-232 port is 9600 baud, 8 data bits, 1 stop bit, no parity.

zz Config port — USB mini-B connector (F on the front panel diagram on page 3) for USB control.

RS-232 Auto SW HDMI Series Switcher

 

Rear Panel

TxRx G

Remote Port

 

NOTE: If you use cable that has a drain

wire, tie the drain wire to ground at both ends.

Ground (G)

Receive (Rx) Transmit (Tx)

Transmit (Tx) Receive (Rx)

Computer or

Control System

RS-232 Port

1

Image 1
Contents Installation Steps Rear Panel Features and ConnectionsEnabling Auto-input Switching Application Diagram Front Panel Features68-2312-51 Rev. a
Related manuals
Manual 19 pages 4.5 Kb Manual 3 pages 43.46 Kb

SW8, SW6 specifications

Extron Electronics is renowned for its innovative solutions in the audiovisual (AV) industry. Among its extensive range of products, the SW6 and SW8 series stand out as versatile audio/video switchers designed to streamline the process of managing multiple AV sources.

The Extron SW6 and SW8 are classified as standalone switchers that cater to various application needs, making them particularly suitable for classrooms, conference rooms, and control rooms. The SW6 model allows for the switching of up to six AV sources, while the SW8 model expands this capability to eight sources. This flexibility is crucial in environments where multiple devices need to be connected seamlessly, enhancing productivity and collaboration.

One of the main features of the SW6 and SW8 switchers is their input versatility. They can accommodate a wide array of video formats, including HDMI, VGA, and composite video, ensuring compatibility with older and newer devices alike. Furthermore, both models support audio formats, allowing for the integration of both video and sound sources in a single unit. The switchers typically include audio embedding, which seamlessly combines audio from a chosen source with the video output, enabling streamlined audio and video transmission.

In terms of technology, the Extron SW6 and SW8 devices incorporate advanced switching technology that ensures reliable signal management with minimal latency. Setting them apart is their ability to support features like automatic input switching, allowing users to enjoy an uninterrupted viewing experience without the need for manual intervention. The included RS-232 and Ethernet control capabilities also provide flexibility for integration into larger control systems, enhancing their functionality within complex AV setups.

Additionally, both the SW6 and SW8 series are designed with user-friendly interfaces. Front-panel push buttons allow for intuitive operation, while remote control options give flexibility for integration into existing systems. The units also feature status indicators, providing users with real-time feedback on the currently selected input, making operation straightforward even for non-technical users.

In conclusion, the Extron SW6 and SW8 audio/video switchers are essential tools for managing multiple AV sources with ease. Their versatility in handling various input formats, advanced switching technology, and user-friendly design make them ideal for a range of applications. Whether in an educational setting or a corporate environment, these switchers deliver superior performance and reliability, affirming Extron’s commitment to excellence in the audiovisual landscape.