Computer & RGB Switchers
SW2 VGA DA2 VGA Switcher Series
SPECIFICATIONS
Video
Gain. . . . . . . . . . . . . . . . . . . . . . Unity
Bandwidth. . . . . . . . . . . . . . . . . 300 MHz
Video input
Number / Signal type.. . . . . . . 2
Nominal level. . . . . . . . . . . . . . 1.0
0.7
Minimum / Maximum levels. . Analog: 0.3 V to 1.5
Impedance.. . . . . . . . . . . . . . . . 75 ohms
Horizontal frequency. . . . . . . . 15 kHz to 145 kHz
Vertical frequency.. . . . . . . . . . 30 Hz to 170 Hz
Video output
Number / Signal type | 2 buffered |
Connectors | 2 VGA |
Nominal level | 1.0 |
| 0.7 |
Minimum / Maximum levels. . | 0.4 V to 1.8 |
Impedance | 75 ohms |
NOTE: *RGsB and RsGsBs inputs and outputs will work in manual mode only. Autoswitching requires TTL level sync on pin 13 of the
Sync
Input type | RGBHV, RGBS, RGsB*, RsGsBs*, |
Output type | RGBHV, RGBS, RGsB*, RsGsBs*, |
Input level | 1.7 V to 5.0 |
Output level | TTL: 5.0 |
Input impedance | 510 ohms |
Output impedance | 50 ohms |
Max. input voltage | 5.0 |
Max. Rise / Fall time | 40 ns |
Polarity | Positive or negative (follows input) |
Audio |
|
Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
THD + Noise | 0.03% @ 1 kHz at nominal level |
S/N | >90 dB at maximum output (unweighted) |
Crosstalk | |
Stereo channel separation. . . | >80 dB @ 1 kHz |
CMRR | >75 dB @ 20 Hz to 20 kHz |
Audio input |
|
Number / Signal type | 2 stereo, unbalanced |
Connectors | (2) 3.5 mm female stereo jacks |
Impedance | >10k ohms, balanced/unbalanced, AC coupled |
Nominal level | |
Maximum level | +8 dBV, (balanced or unbalanced) at 1% THD+N |
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number / Signal type.. . . . . . . 1 stereo, balanced/unbalanced Connectors. . . . . . . . . . . . . . . . (1) 3.5 mm captive screw connector, 5 pole Impedance.. . . . . . . . . . . . . . . . 50 ohms unbalanced, 100 ohms balanced Gain error.. . . . . . . . . . . . . . . . . ±0.1 dB channel to channel
Nominal level. . . . . . . . . . . . . .
Control / remote — switcher
Contact closure.. . . . . . . . . . . . Momentary, on a 3.5 mm captive screw connector Contact closure pin
configurations.. . . . . . . . . . . . . 1 = Input #1, 2 = Input #2
General
Power
SW2 VGA DA2 A/AF’s
external power supply.. . . . . . . . 100 VAC to 240 VAC, 50/60 Hz, external, universal; to 12 VDC,
1 A power supply, regulated
SW2 VGA DA2 A/AF’s |
|
power input requirements | 12 VDC, 0.2 A |
SW2 VGA DA2 AF R | 100 VAC to 240 VAC, 50/60 Hz, 12 watts, internal, universal |
Temperature/ Humidity | Storage: |
| Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Rack mount
SW2 VGA DA2 A/AF. . . . . . . . . . Yes, with optional 1U, 9.5" deep rack shelf, part
part
Furniture mountable with included
Attachable to a projector mount with optional PMK 200 projector mount kit, part
SW2 VGA DA2 AF R. . . . . . . . . . Yes, with included rack mounting kit, part
Enclosure type. . . . . . . . . . . . . Metal
Enclosure dimensions
SW2 VGA DA2 A/AF. . . . . . . . . . 1.0" H x 8.75" W x 3.0" D
2.5cm H x 22.2 cm W x 7.6 cm D (Depth excludes connectors.)
SW2 VGA DA2 AF R. . . . . . . . . . 1.75" H x 17.4" W x 3.0" D (1U high, full rack wide)
| 4.4 cm H x 44.2 cm W x 7.6 cm D |
| (Depth excludes connectors.) |
Product weight |
|
SW2 VGA DA2 A/AF | 1.1 lbs (0.5 kg) |
SW2 VGA DA2 AF R | 2.6 lbs (1.2 kg) |
Shipping weight |
|
SW2 VGA DA2 A/AF | 4 lbs (2 kg) |
SW2 VGA DA2 AF R | 7 lbs (4 kg) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Listings | UL, CUL |
Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
MTBF | 30,000 hours |
Warranty | 3 years parts and labor |
NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.
249
europe | dubai | Asia | china | Japan |
+31.33.453.4040 / +800.3987.6673 | +971.4.2991800 | +65.6383.4400 / +800.7339.8766 | +86.21.3760.1568 / +400.883.1568 | +81.3.3511.7655 |
+31.33.453.4050 FAX | +971.4.2991880 FAX | +65.6383.4664 FAX | +86.21.3760.1566 FAX | +81.3.3511.7656 FAX |