Extron electronic 68-392-02 user manual Making the Cable

DIP Switch Settings for IR Broadcaster-Generated Carrier Frequencies

(DIP switch 9: closed. DIP switch 10: not used.)

		Closed = up,							Freq.		Closed = up,							Freq.		Closed = up,							Freq.
		Open = down,									Open = down,									Open = down,
									(kHz)									(kHz)									(kHz)
1		2	3	4	5	6	7	8		1	2	3	4	5	6	7	8		1	2	3	4	5	6	7	8
									110.70									56.78									35.28
									109.80									55.83									34.90
									108.90									54.93									34.53
									108.10									54.03									34.18
									108.08									53.18									33.85
									107.20									52.35									33.50
									106.30									51.55									33.18
									105.50									50.75									32.85
									104.70									50.00									32.53
									104.70									49.28									32.20
	1	2	3	4	5	6	7	8		1	2	3	4	5	6	7	8		1	2	3	4	5	6	7	8
									101.53									48.55									31.90
									98.53									47.85									31.60
									95.73									47.18									31.30
									93.05									46.53									31.03
									90.55									45.90									30.73
									88.15									45.28									30.45
									85.90									44.68									30.18
									83.75									44.08									29.90
									81.70									43.50									29.65
									79.75									42.95									29.38
									77.90									42.40									29.13
									76.13									41.88									28.88
									74.45									41.35									28.63
									72.83									40.85									28.40
									71.28									40.35									28.15
	1	2	3	4	5	6	7	8		1	2	3	4	5	6	7	8		1	2	3	4	5	6	7	8
									69.80									39.88									27.93
									68.38									39.40									27.68
									67.00									38.95									27.45
									65.68									38.50									27.23
									64.43									38.08									27.03
									63.20									37.65									26.80
									62.03									37.23									26.58
									60.90									36.83									26.38
									59.83									36.43									26.18
									58.78									36.03
									57.75									35.65

Making the Cable

Extron provides the 3.5 mm connectors with the IR Broadcaster, however a cable will have to be made to fit your installation requirements. Use the following information to make the cable.

IR Broadcaster with Emitter Port • Installation & Operation 5