Extron electronic setup guide Preliminary, Setup Guide for AVTrac Demonstration Kit, cont’d

Page 2

Setup Guide for AVTracDemonstration Kit, cont’d

Ensure that the kit contains all the items shown in the figure below and assemble the kit components by following the steps below.

NThe illustration below shows the US version of the AVTrac Demonstration kit. The International and Universal models are similar in size and packaging, but contain a single AC outlet, which may be connected to double insulated power cable, or flex conduit without wires.

Cover Track w/ Rubber (shown) or Carpet Finish

Side Ramps

PRELIMINARY

End Ramps

 

Connectivity (AAP) Box

Aluminum

Base

Track

1.Place aluminum base track on a firm, flat surface.

2.Attach the side ramps by mating the tabs in the ramps with the grooves in the track.

3.Place the end ramps in position at the end of the track pieces.

4.Place the connectivity box flush with the end of the track nearest the end ramps. The AC conduit should run from the connectivity box to the opposite end of the track.

5.Attach the cover track (either rubber or carpet finish) by snapping it onto the base track.

6.

Place the pre-cut carpet pieces on top of the ramps and around the connectivity box.

 

Extron USA - West

 

Extron USA - East

 

Extron Europe

 

Extron Asia

 

Extron Japan

 

Extron China

 

 

 

 

 

 

 

Headquarters

 

+800.633.9876

 

+800.3987.6673

 

+800.7339.8766

 

+81.3.3511.7655

 

+400.883.1568

 

 

 

 

 

 

 

 

+800.633.9876

 

Inside USA / Canada Only

 

Inside Europe Only

 

Inside Asia Only

 

+81.3.3511.7656 FAX

 

Inside China Only

 

Inside USA / Canada Only

 

+1.919.863.1794

 

+31.33.453.4040

 

+65.6383.4400

 

 

 

+86.21.3760.1568

 

 

 

 

 

 

 

 

 

+1.714.491.1500

 

+1.919.863.1797 FAX

 

+31.33.453.4050 FAX

 

+65.6383.4664 FAX

 

 

 

+86.21.3760.1566 FAX

 

+1.714.491.1517 FAX

 

©

 

 

 

 

 

 

 

 

 

 

 

 

2009 Extron Electronics. All rights reserved.

 

 

Extron Middle East

+971.4.2991800 +971.4.2991880 FAX

www.extron.com

Image 2
Contents Remove side and end ramps Setup Guide for AVTrac Demonstration KitPreliminary Remove track pieces and connectivity box with AC conduitExtron USA West Extron USA East Setup Guide for AVTrac Demonstration Kit, cont’dPreliminary Extron Europe Extron Asia Extron Japan Extron China

Demonstration Kit specifications

The Extron Electronic Demonstration Kit is an innovative solution designed to facilitate the demonstration and training of various AV (audiovisual) technologies. It serves as an invaluable resource for educators, sales professionals, and technical support teams, enabling them to showcase products effectively and engage their audiences through practical, hands-on experiences.

One of the main features of the Extron Demonstration Kit is its comprehensive range of AV components. The kit typically includes essential devices such as distribution amplifiers, switchers, scalers, and signal processors. This array of equipment allows users to simulate real-world scenarios and configurations, walking clients or students through various setups that they may encounter in commercial or educational environments.

The kit is designed with user-friendly interfaces and robust connectivity options. Offering both HDMI and VGA inputs and outputs, it supports a wide variety of devices, making it versatile for different demonstrations. Additionally, the inclusion of USB-C connectivity allows for the connection of modern laptops and mobile devices, ensuring that participants can easily present content from their own devices.

Another standout characteristic is the integrated control system. The Extron Demonstration Kit often features a user-friendly control interface, allowing for seamless operation of the connected devices. This aspect is particularly beneficial during demonstrations, as it enables the presenter to switch between sources quickly and effectively, enhancing the flow of information and keeping the audience engaged.

The Extron Demonstration Kit is also equipped with advanced technologies like EDID (Extended Display Identification Data) management and HDMI audio extraction. These features ensure that the video signals remain consistent and that audio can be routed independently, providing a comprehensive setup that simulates real-life AV installations.

In an era where remote learning and virtual demonstrations are increasingly prominent, the kit also reflects portability and ease of transport. Compact designs allow it to be easily set up in various environments, such as classrooms, conference rooms, or trade shows.

Overall, the Extron Electronic Demonstration Kit encapsulates innovative technologies and practical design, making it an essential tool for anyone presenting audiovisual concepts. Its blend of versatility, connectivity, and ease of use ensures effective demonstrations that can significantly enhance understanding and engagement in both educational and commercial settings.