Extron electronic SYSTEM 8/10 PLUS guide

Hughes Installation	Configuration and Connections

Hughes/JVC Projector Configuration

Check to see if the System 8/10 PLUS is already configured for the Hughes/JVC projector. The general setup is explained on page 3-4 and the switch settings for the Hughes/JVC projector are repeated below.

1. Use a small screwdriver to remove the access cover from the System 8/10 PLUS front panel. See bottom of page 3-3. The label on the back of the access cover also has the configuration information.

__________ Before changing anything, remove the AC power cord to the System 8/10 PLUS

to verify that the main power is OFF; also turn the projector power OFF.

2. Set the switches as follows:

Config

Model

Rotary Switches

Cable

SW15 Settings

Comm

RS1

RS2

RS3

RS4

J2/J3

Adapter

Hughes-JVC

↓

−

↓

−

↓

−

↓

26-467-01

_ RS5 is for RGB switching delay. See page 3-4 for more information on switch functions.

RS2

RS5 RS2 RS1

RS1

SW15 DIP Switch

RS3 RS4

RS3

RS4

Configured For:

RS-232

3.Use a grease pencil (or other rub-off marker) to mark the space on the label next to “Hughes/JVC”.

4.Locate the switcher’s Address DIP switches on the rear panel, lower right. Unless this is part of a master/slave system, set #3 and #5 to the up position and the others down. See picture to the left.

Use the illustration on the facing page to do the following steps.

5.Connect the Comm Adapter’s 9-pin female connector to the 9-pin male “Control Out” connector on the rear panel of the projector.

6.Connect the CC-50' (or CC-100') cable from the 9-pin male connector of the Comm Adapter to the 15-pin HD “Projector Control” port located on the rear panel of the System 8/10 PLUS.

______ Secure the screws on all D connectors.

7.Connect the BNC (RGBS) cables from the System 8/10 PLUS outputs to the Hughes/JVC projector inputs according to the application requirements. (RGBS, S-Video and/or Composite Video)

8.Apply Main Power to the System 8/10 PLUS by connecting the power cord. The Main Power LED should light. Apply power to the projector.

9.Return System 8/10 PLUS and projector to normal operation.

Extron • System 8/10 PLUS • User’s Manual • P/N 68-412-01 Rev. A

Page 3

SYSTEM 8/10 PLUS specifications

Extron Electronics has long been recognized as a leader in advanced audiovisual solutions, and among its extensive product offerings is the System 8/10 Plus. This sophisticated matrix switcher is tailored for large-scale AV applications, providing reliable performance and versatile capabilities. Designed to handle multiple audio and video sources, the System 8/10 Plus is an ideal choice for diverse environments such as educational institutions, corporate settings, and large venues.

One of the standout features of the System 8/10 Plus is its ability to support a wide range of input and output formats. This flexibility ensures compatibility with various devices such as projectors, monitors, and video conferencing systems. The system offers configurations with up to 10 inputs and 10 outputs, allowing for extensive routing options to meet the specific needs of any AV setup.

Incorporating advanced technologies, the System 8/10 Plus utilizes Extron's unique technologies such as EDID Minder and Key Note Recovery. EDID Minder ensures that the correct Extended Display Identification Data is maintained during switching operations, preventing signal loss and ensuring seamless transitions between devices. Key Note Recovery, on the other hand, compensates for varying output formats, delivering a consistent presentation experience.

Another vital characteristic of the System 8/10 Plus is its intuitive control capabilities. The device can be easily integrated with Extron's Global Control and other third-party control systems, providing users with a simple yet comprehensive way to manage their AV environment. With options for user-friendly interfaces such as touch panels and mobile device control, operators can quickly adjust settings to achieve optimal performance.

Reliability is paramount, and the System 8/10 Plus delivers on this front with its robust construction and advanced thermal management system. This ensures sustained operation even in demanding environments, reducing the risk of system failure during critical presentations or events.

In summary, the Extron Electronic System 8/10 Plus epitomizes advanced AV technology with its extensive input/output capabilities, sophisticated signal management features, and user-friendly control options. Ideal for large-scale installations, this matrix switcher stands out as a dependable solution that meets the dynamic demands of modern audiovisual applications.