Extron electronic 68-1405-01 manual AVTrac Rough-In Adapter Installation Guide

Page 1

AVTrac™ Rough-In Adapter Installation Guide

This adapter is designed for installation in new stud wall constructions, prior to installing the gypsum board walls (drywall).

(2)Masonry Screws

1. Determine where AVTrac will abut the wall. (See the

 

AVTrac Installation Guide [part number 68-1405-01] for

 

factors that must be considered before installation.)

 

Cut out a section of the wall base stud that is 4”

 

(10.1 cm) wide and align the front edge of the adapter

 

base with the front edge of the wall base stud (see the

Rough-In Adapter Base

figure at right).

 

 

(Front edge is level with

2. Mark the position of the holes in the adapter base,

wall base stud.)

Wall Base Stud

 

and drill at least two holes into the

 

 

Dry Wall

concrete 5/32” (0.4 cm) diameter and 1 1/2” (3.8 cm) deep. Secure

 

the adapter to the floor with the provided masonry screws.

4.0"

3.

Cut a notch 1.5” (3.8 cm) high x 4” (10.1 cm) wide

 

 

in the bottom edge of the drywall and place the

 

 

drywall over the rough-in adapter with the top edge

 

 

of the notch resting on top of the adapter’s front

 

1.5"

support. Secure the drywall to the wall frame (see

 

the figure at left).

 

 

 

 

Rough-In Adapter

4.

Install the AVTrac system. For complete information

Front Support

 

about installing the AVTrac system, consult the

AVTrac Installation Guide.

AVTrac™ Wall Trim Plate Installation Guide

The wall trim plate is a finishing plate that compensates for any overcuts to the existing gypsum wall during AVTrac intstallation.

Install the trim ring in place of, or behind, existing wall base trimmings as follows:

1. Install the AVTrac system, as described in the AVTrac Installation Guide (part number 68-1405-01).

2. Before snapping the cover track in place and covering the track with a carpet or rubber strip, place the trim plate against the wall so that it is seated on the AVTrac, covering the overcut hole in the wall.

3. Mark the position of the two holes in the trim ring on the wall and, using the screws provided, secure the trim plate to the wall.

4. Snap the cover track in place and cover the track and ramps with carpet, as described in the AVTrac Installation Guide (part number 68-1405-01). If required, trim the wall baseboard to fit snugly around the track and attach it to the wall, over the trim plate.

 

Extron Electronics, USA

Extron Electronics, Europe

Extron Electronics, Asia

www.extron.com

800.633.9876

714.491.1500

+800.3987.6673

+31.33.453.4040

+800.7339.8766

+65.6383.4400

FAX 714.491.1517

FAX +31.33.453.4050

FAX +65.6383.4664

Wall Trim Plate

Extron Electronics, Japan

68-1603-01

+81.3.3511.7655

Rev A

FAX +81.3.3511.7656

06 08

Page 1 Page 1
Image 1
Page 1 Page 1
Contents AVTrac Wall Trim Plate Installation Guide AVTrac Rough-In Adapter Installation Guide

68-1405-01 specifications

Extron Electronics, a leading manufacturer of professional AV system integration products, offers a wide range of solutions designed to enhance presentation environments. Among their popular offerings is the Extron 68-1405-01, a versatile product designed for high-performance AV applications.

The Extron 68-1405-01 is primarily recognized for its exceptional distribution capabilities. This device is engineered to deliver reliable transmission of high-definition video signals while maintaining signal integrity over extended distances. Equipped with advanced signal processing technologies, it ensures that users experience the highest quality video output, whether for presentations in corporate environments, educational institutions, or entertainment venues.

One of the standout features of the Extron 68-1405-01 is its ability to support multiple formats and resolutions. It is compatible with a variety of video standards, including 1080p and 4K signals, catering to the needs of modern AV systems. This flexibility makes it an ideal choice for integrators looking for a universal solution that can adapt to different content sources and display technologies.

Additionally, the unit incorporates Extron's proprietary technologies, such as EDID management and pixel-by-pixel video scaling. These features ensure that the video output is finely tuned to match the specifications of connected devices, minimizing the risk of compatibility issues and enhancing the viewing experience. The EDID management allows users to configure settings according to specific requirements, simplifying the integration process.

Built with reliability in mind, the Extron 68-1405-01 boasts robust construction and comprehensive cooling solutions that ensure optimal performance in any environment. It is designed to operate continuously without overheating, making it suitable for both routine use and demanding applications.

Furthermore, installation and configuration are facilitated by its user-friendly interface and intuitive design. The device includes a range of input and output options, enabling seamless connectivity with various AV components. This ease of use, combined with Extron's commitment to quality, solidifies the 68-1405-01's status as a go-to choice for AV professionals looking for a reliable distribution solution.

In conclusion, the Extron 68-1405-01 stands out as a powerful and flexible product, featuring advanced signal processing, support for multiple video formats, and robust design. Its incredible versatility and performance characteristics make it an essential tool for any high-quality AV installation.
Top Page Image Contents