System Requirements:
∙Mobile Broadband Data card (USB or ExpressCard) with Active Subscription, or Supported Phone with Active Tethered Data Plan
∙Windows 2000/XP/Vista, Mac OS X, or Linux PC
∙Internet Explorer v6.0, Firefox v2.0, or Safari v1.0 (minimum)
1 | Connect Power: |
Plug the power adapter into the power connector on the rear of the MBR800. Next, plug the adapter into a
wall socket.
Power Supply
2 | For a Wireless WAN |
| (Cellular) Connection: |
Connect your activated mobile broadband adapter to the USB port or
the ExpressCard port on the side of the MBR800.
MBR800
Mobile Broadband Router
3 | For a Wired WAN |
| connection: |
Connect one end of the Ethernet cable to the WAN port on your MBR800.
Connect the other end to your Internet WAN source, such as cable or DSL modem.
The activated mobile broadband adapter must be on the MBR800 Supported Devices list. For more information, go to www.cradlepoint.com/support.
4 | Connect Local Wired |
| Clients: |
Connect one end of a standard RJ45 Ethernet cable to a LAN port on the
MBR800 and the other end to a computer. You may connect up to four (4) comput- ers.
Continue to the back page for access information.
Parts List:
∙MBR800 Mobile Broadband Router
∙AC Power Adapter (12V, 1.5A)
∙CAT5 Ethernet Cable (1.5 meters)
∙Warranty Registration Card
∙Wall Mounting Hardware
Quick Start Guide (this document) | Part Number: |
|