UNPACKING AND SETUP
This chapter provides unpacking and setup information for the Switch.
Unpacking
Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items:
One
Four rubber feet with adhesive backing
One external power adapter
This User’s Guide
If any item is found missing or damaged, please contact your local reseller for replacement.
Setup
The setup of the Switch can be performed using the following steps:
Install the Switch in a fairly cool and dry place. See Technical Specification for the acceptable operation temerature and humidity ranges.
Install the Switch in a site free from strong electromagnetic source,vibration, dust,and direct sunlight.
Leave at least 10cm of space at the left and right hand side of the Switch for ventilation.
Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.
7