Wireless Basic Settings

Gigabyte GN-MD01 user manual Wireless Basic Settings

GN-MD01 AirCruiser G Game Adapter

The Game Adapter will automatically detect your wireless settings. Typically, modification to the default settings is required. Changes of these settings will influence your wireless connection and performance.

SSID

ESSID (or SSID as it is usually referred to) is the network name of the Game Adapter in the wireless network. You should set the same SSID name for all your wireless-equipped devices to allow dynamic clients to easily roam among them. The SSID name can be up to 32 characters in length and is case sensitive (i.e. upper case letters “A~Z” and lower case “a~z” are unique).

RTS Threshold

The default value of “2347” should not be changed. However, in case of inconsistent data flow, adjustment the value to a lower number and retry. Enter a value within the range 0~2347 for the port. RTS (Request To Send) is a function, requesting permission to transmit signals. RTS is a collision avoidance method used by all 802.11b wireless networking devices. In most cases you will not need to activate or administer RTS. Generally, RTS only needs to be configured if you find yourself in an Infrastructure environment where all nodes are in range of the Access Point but may be out of range of each other.

802.11g Only Mode

Enabled -- No Wireless-B clients will be allowed on the network.

Disabled – Both Wireless-G and Wireless-B clients will be allowed on the network. (Default setting)

RF Radio

Enable or disable the RF Radio function.