Floppy 3 Mode Support (for Japan Area)
Disabled | Normal Floppy Drive. (Default value) |
Drive A | Drive A is 3 mode Floppy Drive. |
Drive B | Drive B is 3 mode Floppy Drive. |
Both | Drive A & B are 3 mode Floppy Drives. |
|
|
Video
The category detects the type of adapter used for the primary system monitor that must match your video display card and monitor. Although secondary monitors are supported, you do not have to selectthe type in setup.
EGA/VGA | Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, |
| SVGA, or PGA monitor adapters |
|
|
CGA 40 | Color Graphics Adapter, power up in 40 column mode |
|
|
CGA 80 | Color Graphics Adapter, power up in 80 column mode |
|
|
MONO | Monochrome adapter, includes high resolution monochrome adapters |
|
|
Halt on
The category determines whether the computer will stop if an error is detected during power up.
NO Errors | The system boot will not stop for any error that may be detected |
| and you will be prompted. |
|
|
All Errors | Whenever the BIOS detects a |
|
|
All, But Keyboar | The system boot will not stop for a keyboard error; it will stop for |
| all other errors. (Default value) |
|
|
All, But Diskette | The system boot will not stop for a disk error; it will stop for all |
| other errors. |
|
|
All, But Disk/Key | The system boot will not stop for a keyboard or disk error; it will |
| stop for all other errors. |
|
|
26