Gigabyte GA-K8NE user manual Time, IDE Channel 0 Master/Slave IDE Channel 1 Master/Slave

English

2-1	Standard CMOS Features
			CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
					Standard CMOS Features
	Date (mm:dd:yy)				Tue, Mar 15 2005		Item Help
	Time (hh:mm:ss)				14:42:37		Menu Level`
` IDE Channel 0 Master					[None]		Change the day, month,
` IDE Channel 0 Slave					[None]		year
` IDE Channel 1 Master					[None]
` IDE Channel 1 Slave					[None]		<Week>
	Drive A				[1.44M, 3.5"]		Sun. to Sat.
	Drive B				[None]		<Month>
	Floppy 3 Mode Suport				[Disabled]		Jan. to Dec.
	Halt On				[All, But Keyboard]		<Day>
							1 to 31 (or maximum
							allowed in the month)
							<Year>
							1999 to 2098
KLJI: Move		Enter: Select		+/-/PU/PD: Value		F10: Save	ESC: Exit	F1: General Help
			F5: Previous Values			F7: Optimized Defaults
	Date
	The date format is <week>, <month>, <day>, <year>.
	Week		The week, from Sun to Sat, determined by the BIOS and is display only
	Month		The month, Jan. Through Dec.
	Day		The day, from 1 to 31 (or the maximum allowed in the month)
	Year		The year, from 1999 through 2098

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military- time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave IDE devices setup. You can use one of three methods:

• Auto	Allows BIOS to automatically detect IDE devices during POST(default)
• None	Select this if no IDE devices are used and the system will skip the automatic
	detection step and allow for faster system start up.
• Manual	User can manually input the correct settings.
Access Mode	Use this to set the access mode for the hard drive. The four options are:
	CHS/LBA/Large/Auto(default:Auto)
Capacity	Capacity of currently installed hard disk.

GA-K8NE Motherboard - 30 -