Gigabyte AGP 4X/8X manual Backup

Page 80

English

The Main Screen of Xpress Recovery2

1. RESTORE:

 

Restore the backed-up data to your hard disk.

 

(This button will not appear if there is no backup

 

file.)

 

2. BACKUP:

 

Back up data from hard disk.

 

3. REMOVE:

 

Remove previously-created backup files

 

to release disk space.

 

(This button will not appear if there is no backup

 

file.)

 

4. REBOOT:

 

Exit the main screen and restart the system.

Limitations:

 

1.Not compatible to Xpress Recovery.

2.For the use of Xpress Recovery2, a primary partition must be reserved.

3.Xpress Recovery2 will store the backup file at the end of the hard disk, so free space available on the hard disk for the backup file must be allocated in advance. (A minimum 4GB is recom- mended but the actual space is dependent on the size of the data to be backed up)

4.Capable of backing up hard disks installed with Windows operating systems including DOS and Windows XP/2000/NT/9x/Me.

5.USB hard disks are currently not supported.

6.Does not support RAID/AHCI (class code 0104/0106) hard disks.

7.Capable of backing up and restoring only the first physical hard disk.

Hard disks detection sequence is as follows:

a.PATA IDE primary channel

b.PATA IDE secondary channel

c. SATA IDE channel 1

d.SATA IDE channel 2

e.SATA IDE channel 3

f.SATA IDE channel 4

Precautions:

1.When using hard disks with more than 128G under Windows 2000, be sure to execute the EnableBigLba.exe program from the driver CD before data backup.

2.It is normal that data backup takes longer time than data restoration.

3.Xpress Recovery2 is compliant with the GPL regulations.

4.On a few motherboards based on Nvidia chipsets, BIOS update is required for Xpress Recovery2 to correctly identify RAID and SATA IDE mode. Please contact your motherboard manufacturer.

5.Xpress Recovery2 supports only PATA hard disks and not SATA hard disks on the following motherboards (As this is a BIOS-related issue, it can be solved by BIOS update)

GA-K8U

GA-K8NXP-9

GA-8N-SLI Royal

GA-K8U-9

GA-K8N Ultra-9

GA-8N-SLI Pro

GA-K8NXP-SLI

GA-K8NF-9 (PCB Ver. 1.0)

GA-8N-SLI

GA-K8N Ultra-SLI

GA-K8NE (PCB Ver. 1.0)

 

GA-K8N Pro-SLI

GA-K8NMF-9

 

GA-8IPE775 Series Motherboard

- 76 -

 

Image 80
Contents AGP 4X/8X notch Page Mother Board Declaration of Conformity GA-8IPE775 Series Table of Content Table of Content Installing the motherboard to the chassis Features Summary IntroductionOnly for GA-8IPE775 Pro. Only for GA-8IPE775-G GA-8IPE775 Series Motherboard Layout GA-8IPE775 Pro/-GBlock Diagram DDREnglish English Hardware Installation Process StepInstall the Central Processing Unit CPU HT functionality requirement contentInstallation of Memory Installation of the HeatsinkDDR Introduction Dual Channel Technology DS Double Side, SS Single Side Install expansion cards Parallel Port, Serial Port and VGA Port LPT/COMA/COMB Install I/O Peripherals CablesPS/2 Keyboard and PS/2 Mouse Connector USB / LAN Connector Audio ConnectorsConnectors Introduction ATX12V/ATX Power Connector 5 Cpufan / Sysfan / Pwrfan Cooler Fan Power Connector IDE1 / IDE2 IDE1 / IDE2 ConnectorFDD Floppy Connector PwrledFpanel 2 x 10 pins Connector Faudio Front Audio Connector Surcen Surround Center ConnectorCdin CD In Connector Spdifio Spdif In/Out ConnectorFUSB1 / FUSB2 Front USB Connector IrcirGame Game Connector Infolink18 F11394 Ieee 1394 Connector 19 F21394 Ieee 1394 ConnectorSATA0/SATA1 Serial ATA Connector CI Chassis Intrusion, Case OpenBAT Battery Clrcmos Clear CmosBios Setup Status Page Setup Menu / Option Page Setup Menu Advanced Bios FeaturesMain Menu Integrated PeripheralsPower Management Setup PnP/PCI ConfigurationsLoad Fail-Safe Defaults Load Optimized DefaultsTime Standard Cmos FeaturesDate IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave Drive a / Drive BFloppy 3 Mode Support for Japan Area Halt onMemory Base MemoryFirst / Second / Third Boot Device Advanced Bios FeaturesHard Disk Boot Priority Password Check Boot to OS2 or DR-DOSCPU Hyper-Threading Limit Cpuid Max. toIntegrated Peripherals Sata Port0 Configure as Sata Port1 Configure asOn-Chip Primary PCI IDE On-Chip Secondary PCI IDEOnboard LAN Boot ROM USB Mouse SupportAC97 Audio Onboard H/WUart Mode Select UR2 Duplex ModeParallel Port Mode ECP Mode Use DMAPower Management Setup Midi Port IRQCIR Port Address CIR Port IRQOff by Power button Resume by AlarmPower On By Mouse Power On By KeyboardPnP/PCI Configurations AC Back FunctionPC Health Status CPU Warning Temperature Power FAN Fail WarningCPU FAN Fail Warning System FAN Fail WarningFrequency/Voltage Control CPU Clock RatioCPU Host Clock Control CPU Host Frequency MhzAGP/PCI/SRC Fixed Memory Frequency ForMemory Frequency Mhz AGP/PCI/SRC Frequency MhzLoad Fail-Safe Defaults Load Optimized DefaultsCPU OverVoltage Control Normal CPU VcoreSet Supervisor/User Password Save & Exit Setup Exit Without SavingHow to use Dual Bios and Q-Flash Utility? Flash Bios Method IntroductionWhat is Dual Bios Technology? Wide Range Protection DisableDefault, Enable Boot From Main BIOSDefault, Backup BiosAuto Recovery EnableDefault, Disable Halt On Error DisableDefault, EnableKeep DMI Data EnableDefault, Disable Copy Main ROM Data to BackupBefore You Begin Entering the Q-FlashTMutility Exploring the Q-FlashTM / Dual Bios utility screen Move to the Bios file you want to flash and press Enter Load Default Settings Press Y on your Exploring the Q-FlashTMutility screen Bios file in the floppy disk Congratulation!! You have updated Bios successfully Method 2 @ Bios Utility English Stereo Speakers Connection and Settings 6- / 8- Channel Audio Function IntroductionChannel Analog Audio Output Mode Basic 6 Channel Analog Audio Output Mode Channel Audio Setup using Audio Combo Kit, Optional Device English Spdif Output Device Optional Device Auto-detecting Introduction of audio connectorsJack-Sensing and UAJ Introduction Manual setting UAJ IntroductionXpress Recovery2 Introduction How to use the Xpress Recovery2Backup English English Install Drivers Pictures below are shown in Windows XPItem Description Software Application Software Information FAQ English Troubleshooting END Technical Support/RMA Sheet Acronyms Ioapic English Contact Us Taiwan HeadquartersChina Shanghai

AGP 4X/8X specifications

The Gigabyte AGP 4X/8X graphics card represents a pivotal advancement in the world of computer graphics, offering enhanced performance and improved features suitable for a wide range of applications. The Accelerated Graphics Port (AGP) interface, which this card utilizes, allows for faster communications between the graphics card and the motherboard, significantly increasing the data transfer rates over its predecessor, the PCI slot.

One of the standout features of the Gigabyte AGP 4X/8X card lies in its dual compatibility with both AGP 4X and AGP 8X, effectively doubling the bandwidth from 1 GB/s to 2 GB/s. This fast data exchange allows for smoother rendering of high-resolution textures, improved frame rates, and better overall gaming experiences. The enhanced bandwidth is essential in meeting the demands of modern applications, making the card an excellent choice for both casual gamers and professional users.

In terms of technology, the card leverages advanced graphics processing units (GPUs) that support various shader models. This enables it to handle complex visual effects with ease, creating more realistic visuals in video games and applications that rely heavily on graphical fidelity. The latest GPU architectures also provide support for features like anti-aliasing, anisotropic filtering, and dynamic lighting, making the visual outputs more stunning.

The Gigabyte AGP card often comes equipped with a substantial amount of onboard video memory, allowing for better performance in graphically intensive tasks. This onboard memory is crucial for buffering textures and graphics data, leading to faster load times and decreased stuttering during gameplay.

Another important characteristic of the Gigabyte AGP 4X/8X graphics card is its robust thermal management. Many models include advanced cooling solutions—such as heat sinks and fans—that help maintain optimal operating temperatures, thus prolonging the lifespan of the card and maintaining performance under strain.

Additionally, the card is designed with ease of installation in mind, featuring a standard AGP connector for straightforward integration into compatible motherboards. With its solid build quality and reliable performance, the Gigabyte AGP 4X/8X remains a compelling option for those looking to upgrade their graphics capabilities without venturing into more complex solutions. It balances performance, technology, and user-friendliness, making it a valuable asset in the realm of graphics hardware.