Step 4: Install AGP Card
1.Read the relate AGP card's instruction document before install the AGP card into the computer.
2.If your AGP card has "AGP 4X(1.5V) notch"(show below), please make sure your AGP card is AGP 4X(1.5V).
3.Please carefully pull out the small
Step 5: Install I/O Peripherals Cables
Step 5-1: I/O Back Panel Introduction
u | v | y | { |
| |||
| x |
| |
| w | z | } |
|
|
|
uPS/2 Keyboard and PS/2 Mouse connector
This connector supports standard PS/2 keyboard and PS/2 mouse.
vParallel port (LPT)
Device like printer can be connected to Parallel port.
wSerial port (COMA)
Mouse and modem etc. can be connected to Serial port.
xVGA port
Monitor can be connected to VGA port.
yLAN port
LAN is fast Ethernet with 10/100Mbps speed.
zUSB port
Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard, mouse, scanner, zip, speaker...etc. Have a standard USB interface. Also make sure your OS supports USB controller. If your OS does not support USB controller, please contact OS vendor for possible patch or driver upgrade. For more information please contact your OS or device(s) vendors.
{Line In jack
Devices like
English
- 11 - | Hardware Installation Process |