Gigabyte 6ZMM manual Specification, Hardware

Page 11

Specification

2. SPECIFICATION

2.1. HARDWARE

CPU

SPEED

DRAM MEMORY

CACHE MEMORY

I/O BUS SLOTS

IDE PORTS

I/O PORTS

Pentium® II / III / Celeron processor 233 – 650 MHz.

242 pins 66/100 MHz slot1 on board.

66/100 MHz system speed.

66 MHz AGP bus speed. (2X mode 133MHz)

33 MHz PCI-Bus speed.

8 MHz AT bus speed.

2 banks 168 pins DIMM module sockets on board.

Use 8 / 16 / 32 / 64 / 128 / 256 MB DIMM module DRAM.

8 ~ 256MB SDRAM.

Supports 3.3V SDRAM.

32 KB 1st cache memory included in CPU.

128KB / 512 KB 2nd cache in CPU.

Supports DIB speed mode for L2 Cache.

3 33MHz Master / Slave PCI-BUS.

1 8MHz 16 bits ISA BUS.

2 Ultra DMA/33 Bus Master IDE channels on board.(Using IRQ14,15)

Support Mode 3,4 IDE & ATAPI CD – ROM.

Supports 2 16550 COM ports.

Supports 1 LPT port.

Supports 1 Floppy port.

Supports 2 USB ports.

Supports 1 PS/2 Mouse.

Supports 1 PS/2 Keyboard.

2-1

Image 11 Contents
Hardware Installation Table of Contents IntroductionSpecification Table of Contents Bios ConfigurationYamaha Sound Driver Installation Page Preface KEY FeaturesIntroduction Performance List Winbench98Hi-End 39.1 43.4 Block DiagramIntroduce the Pentium II / III Processors What is AGP? Page Hardware SpecificationEnvironment SoftwareSpecification Page Unpacking Hardware InstallationMainboard Layout Quick Reference for Jumpers & ConnectorsSense Open RES S P K R JP6CPU Speed Setup Dram InstallationCmos RTC & ISA CFG Cmos Sram IDE & Atapi Device Installation Speaker Connector InstallationHardware Reset Switch Connector Installation Power LED Connector Installation12.PS/2 Keyboard & Mouse Installation