Philips AZ4000 manual Power Supply, Batteries not included, Battery low indication

XP AZ 4000/00-1 19-11-2001 12:10 Pagina 7

Controls Power Supply

8BAND – selects FM/ MW (AM)/ LW (some versions only) waveband

9PRESET +, - (up, down) MP3-CD: selects an album TUNER: selects a preset radio station

10TUNING ∞, § (down, up) – tunes to tuner stations

11TUNER – selects tuner sound source

129 – stops MP3-CD/ CD playback;

–erases a MP3-CD/ CD program

13¡, ™ – skips to the beginning of a current track previous/ subsequent track

14MUTE – interrupts/ resumes sound

15REPEAT – repeats a track/ program/ entire MP3-CD/ CD

Power Supply

Whenever convenient, use the power supply if you want to conserve battery life. Make sure you remove the plug from the set and wall outlet before inserting batteries.

Batteries (not included)

8 x R20/ UM1/ D CELL

Remote control English

Insert 2 batteries, type AAA, R03 or UM4 (preferably alkaline).

2Replace the compartment door, making sure the batteries are firmly and correctly in place.The set is now ready to operate.

Battery low indication

If battery power is running low, appears in the display.You should change to

AC power or replace the batteries.

Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst.Therefore:

•Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the set.

•When inserting new batteries, do not try to mix old batteries with the new ones.

•Remove the batteries if the set is not to be used for a long time.

Batteries contain chemical substances, so they should be disposed of properly.

1Open the battery compartment and insert 8 batteries, type R-20, UM-1or D-cells, (preferably alkaline) with the correct polarity as indicated by the "+" and "–" symbols inside the compartment.

7