Gigabyte GA-8I865GME-775-RH user manual CPU Hyper-Threading Note, Limit Cpuid Max. to 3 Note

Page 33

CPU Hyper-Threading (Note)

Enabled	Enable CPU Hyper Threading Feature. Please note that this feature is only
	working for operating system with multi processors mode supported.
	(Default value)
Disabled	Disable CPU Hyper Threading.

Limit CPUID Max. to 3 (Note)

Enabled	Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled	Disable CPUID Limit for windows XP. (Default value)

No-Execute Memory Protect(Note)

Enabled	Enable No-Execute Memory Protect function.(Default value)
Disabled	Disable No-Execute Memory Protect function.

CPU Enhanced Halt (C1E) (Note)

Enabled	Enable CPU Enhanced Halt (C1E) function.(Default value)
Disabled	Disable CPU Enhanced Halt (C1E) function.

CPU Thermal Monitor 2 (TM2) (Note)

Enabled	Enable CPU Thermal Monitor 2 (TM2) function.(Default value)
Disabled	Disable CPU Thermal Monitor 2 (TM2) function.

CPU EIST Function (Note)

Enabled	Enable CPU EIST function.(Default value)
Disabled	Disable CPU EIST function.

Virtualization Technology (Note)

Enabled	Enable Virtualization Technology function. (Default value)
Disabled	Disable Virtualization Technology function.

Init Display First

Select the first initiation of the monitor display from onboard/AGP or PCI VGA card.

PCISet Init Display First to PCI VGA card. (Default value) Onboard/AGP Set Init Display First to onboard/AGP VGA card.

On-Chip Frame Buffer Size

1MB	Set on-chip frame buffer size to 1 MB.
4MB	Set on-chip frame buffer size to 4 MB.
8MB	Set on-chip frame buffer size to 8 MB.
16MB	Set on-chip frame buffer size to 16 MB. (Default value)
32MB	Set on-chip frame buffer size to 32 MB.

English

(Note) This item will show up when you install a processor that supports this function.
- 33 -	BIOS Setup

Image 33

Contents

GA-8I865GME-775-RHrev Motherboard Product Manual Classification CopyrightTable of Contents Drivers Installation Item Checklist 8I865GME-775-RH GA-8I865GME-775-RH rev .0 Motherboard LayoutBlock Diagram Installation Notices Considerations Prior to InstallationInstances of Non-Warranty Preparing Your ComputerCPU Feature SummaryMbit flash ROM Installation of the CPU Installation of the CPU and CPU CoolerInstallation of the CPU Cooler Installation of Memory Dual Channel Memory Configuration Installation of Expansion Cards I/O Back Panel Introduction Connectors Introduction ATX12V / ATX Power Connector IDE1 / IDE2 IDE Connector Cpufan / Sysfan Cooler Fan Power ConnectorSATA0/SATA1 Serial ATA Connector FDD FDD ConnectorFpanel Front Panel Connector Pwrled Faudio Front Audio Panel ConnectorFUSB1 / FUSB2 Front USB Connectors Cdin CD in ConnectorClrcmos Clear Cmos CI Chassis Intrusion, Case OpenBattery Main Menu Status Page Setup Menu / Option Page Setup MenuF12 Boot Menu Main Menu For example Bios Ver. DM „ Advanced Bios Features „ Standard Cmos Features „ Power Management Setup „ PnP/PCI ConfigurationTime Standard Cmos FeaturesIDE Channel 0 Master/Slave IDE Channel 1 Master/Slave IDE Channel 2/3 MasterDrive a Floppy 3 Mode Support for Japan AreaHalt on MemoryHard Disk Boot Priority Advanced Bios FeaturesFirst / Second / Third Boot Device Password CheckLimit Cpuid Max. to 3 Note CPU Hyper-Threading NoteNo-Execute Memory ProtectNote CPU Enhanced Halt C1E NoteSPP Integrated PeripheralsOnBoard LAN Boot ROM Sata Port1 configure asUSB Controller USB 2.0 ControllerParallel Port Mode ECP Mode Use DMAOnboard Parallel Port Acpi Suspend Type Power Management SetupPower On By Mouse Resume by AlarmPower On By Keyboard KB Power on PasswordPCI1 IRQ Assignment PnP/PCI ConfigurationsPC Health Status CPU Smart FAN Control CPU Smart FAN ModeCPU Clock Ratio Note Frequency/Voltage ControlFSB1066 Core.2 CPU CPU Host Clock ControlMemory Frequency For AGP/PCI FixedMemory Frequency Mhz AGP/PCI FrequencyMhzLoad Optimized Defaults Load Fail-Safe DefaultsSet Supervisor/User Password Exit Without Saving Save & Exit SetupInstall Chipset Drivers Drivers InstallationDriver CD Information Software ApplicationsContact Us Hardware InformationEnglish Unique Software Utilities EasyTune 5 IntroductionUser Interface Overview Xpress Recovery2 Introduction How to use the Xpress Recovery2System requirements Main Screen of Xpress Recovery2 PrecautionsLimitations Updating the Bios Flash Bios Method IntroductionMethod 1 Q-FlashTM Before UsePress Y to load Bios defaults Methods and steps Method 2 @BIOSTM UtilityEnglish 4 2 / 4 / 6 Channel Audio Function Introduction Channel Audio SetupChannel Analog Audio Output Mode Center/Subwoofer Speaker Out Troubleshooting Taiwan Headquarters Contact UsGigabyte Global Service System