Cisco Systems STACKT150CM manual Best Practices, Recommendations

Page 15

The table shows the default priorities used by StackPower that can be overwritten by an administrator. As an example, a power stack can assign priority 2 to a switch-A, priority 10 to high priority ports, and priority 20 to low priority ports. Each switch in the stack will have a different priority set for the switch, high priority ports, and low priority ports respectively. The priority levels are not repeated on any switch or port. That is switch-A with has priority level 10 for its high priority ports and if load shedding is required, all other switches in the stack will have to shed off their low priority ports (priority 19-27) and their high priority ports (priority 11-18) before switch-A has to shed off PoE power on its high priority ports because it has the highest priority level (10) for high priority ports.

Figure 13. Load shed sequence

IOS has the capability to monitor administrator priority settings to make sure that a high priority port in Switch-A cannot have a lower priority level than a low priority port on another switch in the stack.

As an administrator you can select any priority level for your switches and devices as long as you keep the hierarchy of the switches, high priority ports, and low priority ports in such a way that a high priority port will not shed off before a low priority port.

Best Practices

Cisco StackPower is an innovative technology that allows for a flexible and efficient use of the power resources in a stack of switches; such an orchestration of hardware capabilities, resources, and features require us to follow certain practices to insure proper and better use of this technology.

Recommendations:

1.Deploy power supplies in a balanced manner, that is, spread larger power supplies across all switches in the stack or install larger power supplies on non-adjacent switches in the stack.

2.Also, fill in slot A of all switches in the stack before installing a power supply in slot B of any switch.

© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.

Page 15 of 17

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Introduction Benefits of Cisco StackPowerTechnology Overview Cisco StackPower One Power Pool, One Load StackPower operationZero-Footprint RPS Adding a new switch to a power stackCisco StackPower and XPS Cables Page Deficit power = -109W Use Case for the Cisco StackPower FeatureShow stack-power Displaying Cisco StackPower InformationShow env power all Intelligent Power ManagementModes of Operation Cisco StackPower TopologyEXpandable Power System XPS Power-Sharing Mode Non-strict or loosePower Share Mode Redundant Mode Power Share Strict ModeIntelligent Load Shedding RPS ModePriority Scheme Balanced power budget Available power Allocated powerRecommendations Best PracticesUnbalanced power stack For More Information

STACKT150CM specifications

The Cisco Systems STACKT150CM is an advanced technology solution designed to meet the diverse networking needs of modern businesses. This system, part of Cisco's extensive product line, highlights the company's commitment to delivering reliable and high-performance networking equipment.

One of the main features of the STACKT150CM is its flexibility in deployment. The unit can be integrated into a variety of network architectures, supporting both enterprise and small business environments. Its modular design allows for efficient scalability, enabling organizations to expand their network capacity as their needs grow. This adaptability makes the device suitable for both existing networks and new setups.

In terms of performance, the STACKT150CM is equipped with high-speed switching capabilities. It operates at impressive speeds, ensuring minimal latency and reinforced reliability in data transmission. This is essential for businesses that rely on real-time data processing and communication. The device supports various protocols, enhancing its compatibility with a wide array of devices and applications within an organization’s infrastructure.

Security features are a significant focus in the design of the STACKT150CM. It incorporates advanced security measures to protect against unauthorized access and cyber threats. This includes built-in firewall capabilities and support for network segmentation, which helps isolate critical data and applications from potential vulnerabilities. With the increasing prevalence of cyberattacks, these features are essential for safeguarding sensitive information.

The STACKT150CM also leverages Cisco's innovative software-defined networking technologies, which provide enhanced control and automation capabilities. Administrators can manage the network more efficiently, allowing for quicker adjustments and responses to changing network demands. This is critical in today’s fast-paced business environment, where operational flexibility and responsiveness are paramount.

Additionally, the device boasts robust energy efficiency features. Its design minimizes power consumption without compromising performance, aligning with the growing emphasis on sustainability in technology. This not only reduces operational costs but also positions organizations as socially responsible entities.

In conclusion, the Cisco Systems STACKT150CM represents a powerful offering in network solutions, combining flexibility, security, performance, and efficiency. It is an ideal choice for businesses looking to enhance their network infrastructure while preparing for future growth and technological advancements.
Top Page Image Contents