MP3/WMA/CD Player
About MP3
The music compression technology MP3 (MPEG1 Audio Layer 3) significantly reduce the digital data of an audio CD while maintaining CD quality sound.
•Getting MP3 files: you can either download legal music files from the internet to your computer hard disc, or create such files by converting audio CD files in your computer through appropriate encoder software. (128kbps bit rate or higher is recommended for MP3 files.)
•Creating an MP3 CD: burn the music files from your computer hard disc on a CDR or CDRW using your CD burner.
Helpful Hints:
–Make sure that the file names of the MP3 files end with .mp3 .
–Total number of music files and albums: around 400 (with a typical file name length of 20 characters)
–The length of file names affects the number of tracks for playback. With shorter file names, more files can be burned on a disc.
Playing a disc
•This CD player plays Audio Discs including
•
IMPORTANT!
•CDs encoded with copyright protection technologies by some record companies may be unplayable by this product.
•
1Press SOURCE on the system repeatedly or press CD on the remote control to select the CD source.
2Open the CD door, and insert a CD with the printed side facing up, then press the CD door gently to close.
➜READ flashes on the display panel as the CD player scans the contents of a disc and then Audio CD: the total number of tracks appears. (See 3)
3Press 2 ; to start playback.
4To pause playback, press 2;.
➜Display : 2 and the track number flash. (See 4)
5To resume, press 2; again.
6To stop playback, press 9.
Helpful hints:
CD play will also stop when:
–you open the CD door;
–you select TUNER, MP3 LINK or USB;
–the CD has reached the end.
Selecting a different track
•Press ∞ / § once or repeatedly until the desired track number appears in the display. For
•In the pause/stop position, press 2; to start playback.
Finding a passage within a track
1During playback, press and hold ∞ or §.
➜The CD is played at high speed and with reduced volume.
2When you recognize the passage you want, release ∞ or § to resume normal playback.
Helpful hints:
–When your searching reaches the end of the last track, the CD goes to stop mode.