Allied Telesis AT-MC606 Port Descriptions, Type of Cabling, Auto MDI/MDI-X, Auto-Negotiation

Page 18

Overview

AT-MC606 Port Descriptions

VDSL Line Port

10Base-T/ 100Base-Tx Ethernet Port

The VDSL Line port features a BNC coaxial connector. It allows you to connect two AT-MC606 VDSL Network Extender units together using an existing internal building coaxial cable. One AT-MC606 VDSL Network Extender is configured as a Provider unit and the other as a Subscriber unit.

The AT-MC606 VDSL Network Extender has one 10Base-T/100Base-Tx Ethernet port which allows you to connect one AT-MC606 configured as a Subscriber unit to an Ethernet device and a second AT-MC606 configured as a Provider unit to an Ethernet Local Area Network (LAN) in the building equipment room. This twisted pair port features an RJ-45 connector with a maximum operating distance of 100 meters (328 feet). For the port pinout details, refer to “RJ-45 Port Pinouts” on page 20.

Type of Cabling

The 10Base-T/100Base-TX Ethernet port is designed to operate with unshielded twisted pair cables. For 10 Mbps operation, Category 3 or better 100 ohm unshielded twisted pair cabling is required. For 100 Mbps operation, Category 5 and Enhanced Category 5 (5E) 100 ohm unshielded twisted pair cabling is recommended.

Auto MDI/MDI-X

A10Base-T/100Base-TX Ethernet port on a network device can have one of two possible wiring configurations: MDI or MDI-X. The Ethernet port on a PC, router, or bridge is typically wired as MDI, while the twisted pair port on a switch or hub is usually MDI-X.

The AT-MC606 Ethernet port features automatic MDI/MDI-X. The port automatically determines the configuration of its end-node and then configures itself appropriately. For example, if the AT-MC606 Ethernet port is connected to a port on a bridge, which is typically wired as MDI, the AT-MC606 VDSL Network Extender automatically configures the Ethernet port to MDI-X. This feature allows you to use either straight-through or crossover cables when connecting the AT-MC606 to other Ethernet devices.

Auto-Negotiation

The AT-MC606 VDSL Network Extender auto-negotiates the speed and duplex mode of the Ethernet link, so that the link comes up in the highest performance configuration supported by both ends. For example, if an end node is capable of only 10 Mbps, the AT-MC606 VDSL Network Extender sets its Ethernet port to 10 Mbps or if an end node is capable of 100 Mbps,

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Installation Guide Copyright 2010 Allied Telesis, Inc Electrical Safety and Emissions Standards Translated Safety Statements Contents Contents List of Figures AT-MC606 Front PanelFigures List of Tables Tables Preface Safety Symbols Used in this Document Symbol Meaning DescriptionWhere to Find Web-based Guides Management Software Updates Contacting Allied TelesisOverview ChapterSummary of Features Vdsl ConfigurationAT-MC606 Rear Panel Auto MDI/MDI-X AT-MC606 Port DescriptionsType of Cabling Auto-NegotiationHalf- and Full-duplex Mode RJ-45 Port Pinouts Status LEDs LEDVdsl Configuration DIP Switches Vdsl Switch DefinitionsConfiguration DIP Switch Descriptions SCBR/PROV Vdsl Configuration SwitchFAST/INTL Vdsl Configuration Switch ASYM/SYM Vdsl Configuration Switch DB/9 dB Vdsl Configuration SwitchExternal AC/DC Power Adapter Applications for the AT-MC606 Vdsl Network Extender Multiple Dwelling Unit MDU TopologyIP Surveillance Topology Installation Reviewing Safety Precautions Selecting a Site for the AT-MC606 Vdsl Network Extender Port Cable Connector Required CablingUnpacking the AT-MC606 Vdsl Network Extender Using Subscriber Unit On a Desktop MC606-ATConnecting AT-MC606 Ethernet Port to Computer Wall-Mounting Subscriber Unit Cabling the Subscriber UnitSubscriber Unit Powering On the Subscriber Unit Installing the AT-MC606 Vdsl Network Extender Provider Unit Using the Provider Unit on a DesktopWall-Mounting the Provider Unit Rack-Mounting the Provider Unit Cabling the Provider Unit InternetTroubleshooting Power LEDLINK/ACT LED 10Base-T/100BaseTX Ethernet Port Link LED Coaxial Vdsl Line PortEnvironmental Specifications Technical SpecificationsPhysical Specifications Power SpecificationsSafety and Electromagnetic Compatibility Certifications

AT-MC606 specifications

The Allied Telesis AT-MC606 is a fast Ethernet media converter designed to provide reliable connectivity and flexibility in a network environment. This device is ideal for those looking to extend their network reach without compromising performance. With its ability to convert between twisted pair cabling and fiber optics, the AT-MC606 supports the transition from copper to a fiber-based infrastructure, catering to a diverse range of networking needs.

One of the main features of the AT-MC606 is its ability to support 10/100 Mbps Ethernet, providing compatibility with both fast Ethernet and standard Ethernet networks. This versatility allows organizations to integrate the media converter seamlessly into existing networks, facilitating an easy migration path to faster connectivity options.

The device includes one 10/100Base-TX twisted pair port and one 100Base-FX fiber optic port, enabling network administrators to connect devices that may be located far apart, up to 2 kilometers with multimode fiber or up to 15 kilometers with singlemode fiber. This distance extends the reach of the network, making it particularly useful for enterprise applications, campus networks, and industrial settings.

The AT-MC606 features a compact design, making it suitable for environments where space is at a premium. It also incorporates a rugged construction to withstand various environmental conditions, ensuring reliable operation in challenging settings. With an auto-sensing capability, the AT-MC606 can automatically detect the speed of the connected device, simplifying installation and reducing configuration time.

Another notable aspect of the AT-MC606 is its support for Link Fault Pass-Through (LFPT), a crucial feature that enhances network resilience. LFPT allows the media converter to automatically detect and signal link failures, enabling quick troubleshooting and minimizing downtime.

Powering the AT-MC606 is straightforward, as it can be powered via a standard AC power adapter, simplifying deployment in various locations. Furthermore, its fanless design ensures that the device operates silently, making it a suitable choice for office environments.

In summary, the Allied Telesis AT-MC606 is a highly versatile media converter that accommodates various networking requirements. With its support for multiple Ethernet standards, robust design, and easy installation, it stands out as an excellent solution for enhancing network performance and extending connectivity.
Top Page Image Contents