ATTO Technology FC 3305, FC 3300 operation manual Macintosh

Page 13

4If it has been identified, click on the Drivers Tab to see if the ATTO ExpressPCI host adapter driver has been started. It will say Started in the right hand column of the window. If the ATTO ExpressPCI host adapter driver appears but is not started, check on the device status. In the Control Panel click on Devices and scroll down to expresfc. Click Startup button. Startup type should be Boot. Click on Hardware profiles, status should be Enabled.

5If ExpressPCI FC does not appear in the

Device List, try reloading the driver software as described in Chapter 4 of this manual.

6If it is started, go back to the Devices tab of the SCSI adapters utility window and double click on the ATTO ExpressPCI host adapter description, and then on the bus it is assigned to. All of the external devices connected in the loop should be identified. If they do not appear in the Device List, the external devices or connection are not working properly.

❖If the card has been recently re-flashed with new firmware, the new NT driver must be installed.

❖For Intel-based PCs, check the computer CMOS setup and verify that the PCI slots are configured correctly. Procedures vary greatly: refer to the manual supplied with your system or call the computer supplier for configuration assistance.

❖If these suggestions do not solve the problem, re-flash the host adapter and re- install the Windows NT driver.

Macintosh

❖Power up Fibre Channel drives before booting up your machine. If the Macintosh host is powered up before the drives, the drives may not automatically mount (depending on when the drives were powered on).

❖Re-flash the card using the updater program (See Chapter 4). Select the unconditional flash option when attempting to re-flash the host adapter.

Troubleshooting

10

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Atto Technology, Inc Atto ExpressPCI FC Page Contents PCI features Common featuresPCI Signal Compatibility Power RequirementsFeatures and benefits Fibre Channel is a key technology for storage LUN LEDPCI ScsiInstallation Hardware installation and initial configurationSystem requirements Fibre Channel addressHssdc Host adapter Cable length Cable type Cable size ConnectorWindows 2000/XP driver installation Installing/updating device drivers and firmwareDevice drivers General suggestions TroubleshootingWindows XP/2000 Windows NTMacintosh FCC standards radio and television interference Appendix a Standards and compliancesAppendix B Fibre Channel accessories LVD HVD Appendix C Scsi host adapter selection guideLVD Appendix D Contact Atto Technology, Inc

FC 3305, FC 3300 specifications

ATTO Technology has long been synonymous with high-performance network solutions, and its latest offerings, the FC 3300 and FC 3305, are no exception. Designed to enhance storage connectivity, these Fibre Channel host bus adapters (HBAs) are engineered to provide exceptional speed, low latency, and enhanced reliability, making them a preferred choice for data centers and businesses that require powerful data management solutions.

One of the standout features of the FC 3300 and FC 3305 is their support for up to 32 Gbps Fibre Channel data rates. This ensures rapid data transfer, which is crucial for applications that need to handle large volumes of data, such as video editing, scientific computing, and big data analytics. The adapters utilize ATTO's advanced technology to minimize bottlenecks, ensuring that data flows seamlessly between servers and storage systems.

The FC 3300 is engineered for environments where high availability and redundancy are paramount. It offers features such as dual-port capability, which enhances reliability and provides a fallback option in the event of a port failure. This is particularly important for mission-critical applications where downtime can have significant repercussions.

In contrast, the FC 3305 model is targeted at users requiring extensive scalability in their storage networks. With support for multiprotocol environments and advanced management features, the FC 3305 allows seamless integration with existing IT infrastructure. This capability ensures that organizations can upgrade their systems incrementally, rather than performing a complete overhaul.

Both models incorporate intelligent queue management, which optimizes data flow and improves response time. This technology is vital for applications that demand consistent performance under heavy loads. Furthermore, the cards are compatible with a wide range of operating systems and virtualization platforms, providing flexibility and ease of integration.

Security is also a key consideration in today’s data environments, and ATTO has incorporated features that safeguard data integrity during transfers. The adapters provide end-to-end data protection, using advanced encryption methods to secure information while it is in transit.

In summary, the FC 3300 and FC 3305 from ATTO Technology stand out in the market for their incredible speed, reliability, and flexible integration capabilities. With their advanced features, these Fibre Channel HBAs cater to the needs of businesses looking to optimize their storage solutions and enhance their overall data management capabilities. Whether it's supporting high-bandwidth applications or ensuring resilience in critical systems, ATTO continues to lead the way in high-performance networking solutions.
Top Page Image Contents