ATTO Technology FC-42XS, FC-21PS, FC-41XS, FC-44ES, FC-42ES, FC-41ES, FC-41EN, FC-42EN Led

Page 17

Term

Definition

fabric

a Fibre Channel switch of two or more Fibre Channel switches interconnected to physically

 

transmit data between any two N_Ports on the switch or switches

FC

Fibre Channel

F_port

a port in the Fibre Channel fabric where a N_port may attach

FL_port

a port in the Fibre Channel fabric where a NL_port may attach in an arbitrated loop

frame

an indivisible unit for transfer of information in Fibre Channel

frame header

the first field in the frame containing the address and other control information about the frame

full-duplex

a communication protocol which allows transmission in both directions at the same time

half duplex

a communication protocol which allows transmission in both directions, but only one direction at a

 

time

host

a processor, usually a CPU and memory, which communicates with devices over an interface

initiator device

a component which originates a command

L_port

a port in an arbitrated loop, either a NL_port or a FL_port

LED

Light-emitting diode: a type of diode that emits light when current passes through it; visible LEDs

 

are used as indicator lights on all sorts of electronic devices

LUN

Logical Unit Number: an identifier for a logical unit (0-7)

multi-mode fiber

an optical fiber which can carry several beams of light at once

N_port

a port attached to a node used with point to point or fabric configurations

NL_ port

a port attached to a node in Fibre Channel arbitrated loop or fabric loop configuration

originator

an initiating device; a component which originates a command

parity checking

a method which verifies the accuracy of data transmitted over the SCSI bus by adding one bit in

 

the transfer to make the sum of all the bits either odd or even (for odd or even parity); an error

 

message occurs if the sum is not correct

PCI

Peripheral Component Interconnect. Allows peripherals to be connected directly to computer

 

memory, bypassing the slower ISA and EISA busses

point-to-point

a topology where two ports communicate

port

an access point in a device: see N_port, NL_port, etc.

port address

also port number; the address, assigned by the PCI bus, through which commands are sent to a

 

host adapter board

port number

see port address

receiver

the ultimate destination of data transmission; a terminal device

scatter/gather

a device driver feature which allows the host adapter to modify a transfer data pointer so that a

 

single host adapter can access many segments of memory, minimizing interrupts and transfer

 

overhead

SCSI

Small Computer Systems Interface: a processor-independent standard for system-level interface

 

between a computer and intelligent devices including hard disks, floppy disks, CD-ROM, printers,

 

scanners, etc.

single-mode fiber

an optical fiber with a small core which supports one wavelength (ray of light); the core radius is

 

nearly equal to the wavelength of the source

topology

logical layout of the parts of a computer system or network and their interconnections

transceiver

a transmitter/receiver module

transfer rate

the rate at which bytes or bits are transferred, as in megabytes or gigabits per second

12

Image 17
Contents Celerity FC host adapters Page Page Contents Page Celerity FC-41EN Adapter Atto provides Fibre Channel solutionsCelerity FC-42EN Adapter Celerity FC-44ES Adapter Celerity FC-42ES Adapter Celerity FC-41ES Adapter Celerity FC-42XS Adapter PCI bus specificationsCelerity FC-41XS Adapter Celerity FC-21PS Adapter API Celerity selection guidePage Glossary Fibre Channel is a key technology for storageLED Windows 2000/XP/Server 2003/Vista Installing and updating driversSpecialized configurations Upgrading an existing Celerity FC driver Adding a Celerity FC adapter to an existing installationCreating a boot disk Linux driver installation, update Mac OS X driver installation, updateCreating a Celerity FC installation floppy Creating a floppy disk from a downloadPage Installation Hardware installationSystem requirements Fibre Channel addressBracket details Page Adapter board details Exhibit 4-11 FC-44ES Exhibit 4-12 FC-42ES Exhibit 4-13 FC-41ES Exhibit 4-14 FC-42XS Exhibit 4-15 FC-41XS Exhibit 4-16 FC-21PS Updating flash on a PC Updating hardware flashUpdating flash in all operating systems General suggestions TroubleshootingMac OS Select Device Manager LinuxFCC standards radio and television interference Appendix a Standards and compliancesCanadian standards European standardsFollowing apply to the Celerity FC-42XS host adapter only Usage restrictionsAppendix B Accessories Appendix C Scsi adapter selection guide Product FeaturesAppendix D SAS adapter selection guide Product Features Atto ExpressSAS RAID Adapters R348 R380Appendix E Contact Atto Technology, Inc
Related manuals
Manual 36 pages 22.13 Kb Manual 36 pages 22.69 Kb

FC-41EN, FC-42EN, FC-41ES, FC-42ES, FC-44ES specifications

ATTO Technology is a leader in the world of storage connectivity and network solutions, and its products are specifically designed to enhance the performance of data-intensive workloads. Among their lineup, the ATTO FC-41ES, FC-41EL, and FC-21PS stand out as powerful Fibre Channel host bus adapters (HBAs), tailored for environments that require reliable, high-speed data transfer.

The ATTO FC-41ES is known for its ability to maximize the performance of high-bandwidth applications, such as video editing, virtualization, and large-scale data storage. It features dual-port 16Gb/s Fibre Channel connections, which ensure that it can handle intensive data transactions efficiently. The FC-41ES is designed with low-latency architecture to provide a significant boost to I/O operations, making it ideal for time-sensitive applications.

On the other hand, the FC-41EL is designed for enterprise use, emphasizing energy efficiency without compromising on performance. This model also offers dual-port 16Gb/s connectivity, allowing for seamless integration into existing storage networks while providing an eco-friendly solution. The FC-41EL’s lower power consumption translates into reduced operating costs for data centers, which is a critical factor for organizations seeking to maximize their return on investment.

The FC-21PS, a SCSI-based host bus adapter, is tailored for applications that may not require the speed of 16Gb/s but still require robust performance and reliability. With its advanced technology, the FC-21PS delivers 8Gb/s speeds while maintaining compatibility with older SCSI systems. This makes it an excellent choice for organizations that are gradually upgrading their infrastructure while still needing to support legacy storage solutions.

All three adapters feature ATTO’s proprietary Advanced Data Streaming (ADS) technology, which optimizes data flow to ensure consistent performance even in highly loaded environments. This technology minimizes latency and maximizes throughput, making it invaluable for applications where every millisecond counts.

The FC-41ES, FC-41EL, and FC-21PS all come with an intuitive management software that simplifies monitoring, configuration, and troubleshooting. This ensures that IT administrators can maintain high availability and performance of their storage networks with minimal effort.

In summary, ATTO Technology’s FC-41ES, FC-41EL, and FC-21PS host bus adapters bring advanced Fibre Channel technology to the table, each tailored to meet specific performance and efficiency demands. Whether it’s high-speed video production, cost-effective enterprise storage solutions, or legacy SCSI system integration, ATTO’s HBAs are designed to deliver superior performance and reliability for all data-intensive applications.