Apple Mac Pro RAID Card and Battery Required Tools, Removing Installed RAID Card and Battery

Required Tools

Phillips #1 screwdriver

Removing the

Installed RAID

Card and Battery

1Locate RAID card.

Note: Before removing or installing a RAID card, you must remove all hard drives. Also remove any

12-inch PCI card blocking access to the RAID card.

2Make sure latch on back panel is up, so that drive is unlocked.

3Pull hard drive out of far-left drive bay.

4Repeat for remaining drives.

© 2009 Apple Inc. All rights reserved. 073-1251 Rev. A   2