Monitor Setting

The color display is equipped with OSD prompting for the monitor settings. All settings must be changed using the remote control.

Invoking the OSD:

1.Remove the remote control from the cradle.

2.Press the - and + buttons at the same time.

3.The OSD menu "Monitor Settings" is displayed.

4.In the OSD menu, you can adjust the following settings:

•	Volume:	Adjust volume level of the built-in monitor speaker.
•	Dimming:	Adjust day brightness when light outside.
		Adjust night brightness when dark outside.

•Display Mode: Select screen display mode. The selected setting is indicated in a yellow bar. Possible selections include:

"Normal" (4:3) "Full Screen" (16:9) "Cinema"

"Wide 1" "Wide 2"

•Setup Menu: Select the following setup parameters:

-Dim.Contr.: Auto/Auto off: Automatic brightness control On/Off. With "Auto" selected, the display brightness is automatically adapted to the ambient lighting.

-Mount. Pos: high/Low: Adaptation of the display brightness to the monitor mounting position high/low.

-Speaker: On/Off: Controls the built-in loudspeaker On/Off.

-Monitor: 1,2 or 3: Must be set for 1.

Adjusting Setting:

1.Press the - and + buttons at the same time.

2.Press the down arrow button ( ) to select the desired menu item.

3.Press the right arrow button (X) to adjust the selected menu item. Confirm by pressing the O.K. button.

If you use the built-in monitor loudspeaker, set the volume level in the OSD menu to the middle setting. Use the + and - buttons on the remote control to adjust the navigation audible messages.

-3-