Tip
•• Only 
and 
AL can be selected when you play programmed tracks.
•• When play CD , Mode should be Repeat/Repeat All/Shuffle.
•• When Mp3, Mode should be Repeat/Repeat Album/Repeat All/ Shuffle.
Program tracks
You can program a maximum of 20 tracks.
1 In CD/USB mode, at the stop position, press PROG to activate the program mode.
»» [PROG] (program) starts to blinks.
2For MP3/WMA tracks, press
3Press 
/ 
to select a track number, then press PROG to confirm.
4Repeat steps 2 to 3 to program more tracks.
5Press 
on the main unit to play the programmed tracks. »» During play, [PROG] is displayed.
•To erase the program, in the stop position, press 
.
•To review the program, in the stop position, press and hold PROG for more than 2 seconds.
General information on cassette recording
•Recording is permissible insofar as copyright or other rights of third parties are not infringed.
•This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording you should use NORMAL type cassettes (IEC I) on which the tabs have not been broken.