Apple 850AV manual Chapter

Page 2

For your own safety and that of your equipment, always take the following precautions.

Disconnect the monitor’s power plug (by pulling the plug, not the cord) if any of the following conditions exists:

mthe power cord or plug becomes frayed or otherwise damaged

myou spill something into the case

myour monitor is exposed to rain or any other excess moisture

myour monitor has been dropped or the case has been otherwise damaged

myou suspect that your monitor needs service or repair

myou want to clean the case (use only the recommended procedure described in “Care and Cleaning” in Chapter 5)

IMPORTANT The only way to disconnect power completely is to unplug the monitor’s power cord. Make sure at least one end of the power cord is within easy reach so that you can unplug the monitor when you need to.

Be sure that you always:

mKeep your monitor away from sources of liquids, such as washbasins, bathtubs, shower stalls, beverages, and so on.

mAvoid setting anything on top of the monitor (such as a book or cup). The monitor could overheat and be damaged.

mKeep the monitor’s vents free from obstruction.

mProtect your monitor from dampness or wet weather, such as rain, snow, and so on.

mRead all the installation instructions carefully before you plug your monitor into a power source.

mKeep these instructions handy for reference by you and others.

mFollow all instructions and warnings dealing with your system.

WARNING Never remove the cover from the monitor or you may come in contact with hazardous voltage levels capable of causing serious injury and possibly death.

2Chapter 1

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Setting Up Your Monitor Important safety and cleaning instructionsChapter What about electromagnetic emissions? Getting ready to set up your AppleVision 850AV Display Your AppleVision 850AV Display at a glance Getting ready to set up your AppleVision 850 Display Your AppleVision 850 Display at a glance Contrast controlsDo you need to install a video card? Resolution Vertical refresh rate hertzWindows-based computers Choosing a good location for your monitorMac OS-based computers Positioning the monitor Shoulders relaxedConnecting the monitor to your computer Connecting to a standard monitor port Connecting the power cordConnecting the monitor cable to a Mac OS-based computer Tighten the thumbscrews on the connection Connecting the monitor cable to various video connectors Connecting the monitor cable to a Windows-based computer Chapter Connecting sound equipment to your AppleVision 850AV Display Connecting the sound cableConnecting external sound equipment Connecting sound input equipment Connecting sound output equipmentUsing more than one monitor Turning the monitor on Start up your computer and wait a few secondsUsing the monitor with Windows-based computers This manual Obtaining online support and updated Apple softwareFinding answers Apple Guide for Mac OS-based computersWhat to do next Installing AppleVision software Make sure you have System 7.1 or later installedDouble-click the CD icon to see what’s on the CD-ROM disc Click ContinueClick Restart Learning about AppleVision software with System 7.5 or later When you can’t see what’s behind the Guide window Tips for using Monitors & Sound GuideWhen you can’t find the information you need When you need more information about an instruction or term Learning about AppleVision software with SystemInstalling and Using AppleVision Software Brightness controls Screen controls at a glanceControl buttons About the Monitors & Sound control panel Opening Monitors & SoundMonitors & Sound buttons at a glance Button DescriptionTips for using AppleVision software Using the Control Strip Using DigitalColor MeterOpening DigitalColor Meter Specifying colors using the Pantone Matching System Conserving energyMake the following choices in the control panel Setting up Energy SaverChoose Control Panels from the Apple K menu Close the control panel What happens after you turn on the energy-saving feature?Using Energy Saver with a screen saver Using Sound and Video Bass controls Volume controlsSound controls at a glance Treble controlsSound output sources About sound sourcesSound input sources Selecting sound options in Monitors & SoundTips for using sound controls Setting up your monitor to record a video with sound About video equipment˜ Composite video input port ÆS-video input portVideo connector Using video equipment with your monitor Assemble the cables you need to connect the VCRFollow the instructions that came with the VCR Turn on the computer, the monitor, and the VCRAudio cable with dual RCA plugs at each end ÆS-video Audio Input port Playing an audio CD through the monitor’s speakers Recording a videoUsing Sound and Video With Your AppleVision 850 a V Display Page Using Your Monitor Installing AppleVision setup information for Windows Click the Settings tab at the top of the dialog boxContrast controls Using onscreen controls Press any button to open the Monitor Controls windowHeight Adjusting screen geometryWidth PincushionHorizontal Shift Adjusting color settings and other featuresDefault RotateOverscan Color TemperatureAudio Power Saver Scan RateHorizontal Adjusting convergenceVertical Adjusting sound on your AppleVision 850AV Display Bass controlsPage Tips and Troubleshooting Care and cleaningTroubleshooting common problems Protecting your monitor from theftMonitor power and screen appearance Monitor’s power indicator light doesn’t come onScreen is dark or appears dim Over time, you experience eyestrainScreen flickers Screen image is too large or too small Screen image is off centerScreen image is tilted slightly to the left or right Images or text on your screen appear fuzzy or blurred You don’t hear a system beep when you start up your computer Sound on your AppleVision 850AV DisplayHeadphone volume is low Internal microphone doesn’t record Playback doesn’t work on your AppleVision monitorTips and Troubleshooting Monitors & Sound control panel for Mac OS-based computers Tips and Troubleshooting You hear no alert sound No colors appear when you create a custom white point No colors appear on the screenPage Appendix a Using ColorSync Problem that ColorSync solvesHow ColorSync works Monitor Setting up ColorSync Setting the ColorSync System Profile Click Set ProfileClick Select Setting other ColorSync profilesTips for best results Close the ColorSync System Profile control panelUsing ColorSync Page Appendix B Technical Information Power-saving and environmental features Mode Power consumption watts W Power indicatorAdjusted at the factory for the following standard modes Hertz Kilohertz Mode ResolutionAudio input signals for AppleVision 850AV Display Microphone for AppleVision 850AV DisplayInput electrical requirements WeightDimensions of AppleVision 850 Display Interfaces for AppleVision 850 DisplayAltitude TemperatureHumidity noncondensing Display cable specifications Pin SignalStandard 15-pin VGA connector VGA adapter specificationsIndex AppleVision Software CD-ROM disc 25, 30 Index Can’t Find It? Index Can’t Find It? Adjusting images on Windows-based computers Can’t Find It? Y, Z AppleVision Display Apple Computer, Inc Contents Installing and Using AppleVision Software Using Sound and Video With Your AppleVision 850AV Display Appendix B Appendix a Using ColorSyncTips and Troubleshooting IndexCispr 22 statement FCC statementIndustry Canada statement Vcci Class 1 statement

850AV specifications

The Apple 850AV, introduced in the early 1990s, was part of Apple's pioneering line of personal computers that showcased advanced multimedia capabilities. The 850AV served as a significant milestone in the evolution of desktop computing, emphasizing audio and video processing in an era when such features were still in their infancy.

At the heart of the Apple 850AV was its robust Apple Macintosh architecture. It was powered by a Motorola 68040 CPU, which offered enhanced performance compared to its predecessors. With a clock speed of 25 MHz, this processor enabled users to run complex applications and manage multitasking more effectively. The system came equipped with a standard RAM configuration of 4 MB, expandable to 68 MB, allowing for smoother operation of demanding software.

One of the hallmark features of the 850AV was its built-in audio capabilities, which included stereo sound output and the ability to handle digitized audio. The system came with a high-quality microphone and a CD-ROM drive, which opened up new possibilities for multimedia applications, education, and entertainment. Users could engage with educational software, listen to CDs, and even create digital audio projects—all from the comfort of their desktop.

Additionally, the Apple 850AV supported video input and output, making it one of the first computers capable of video conferencing. This functionality was facilitated by the inclusion of a video camera interface, allowing users to connect external cameras and partake in video calls and recordings. The system’s graphics capabilities were also noteworthy, supporting an impressive display resolution that enhanced the visual experience for applications and games.

The machine was built around a sleek design, showcasing Apple’s commitment to aesthetics and usability. It featured integrated speakers, a keyboard, and a mouse, all designed to create a seamless user experience. The inclusion of various ports, including USB and SCSI, allowed for connectivity with numerous peripherals, expanding the system’s versatility.

Overall, the Apple 850AV was not just a personal computer; it was a multimedia powerhouse that laid the groundwork for future innovations in computing. Its forward-thinking design and capabilities reflected Apple's dedication to enhancing user experiences and pushing the boundaries of what personal computers could achieve in the realms of audio and video.
Top Page Image Contents