Philips AZ1839 user manual Selecting a different track, Finding a passage within a track

MP3/WMA/CD Player

Selecting a different track

•Press ∞/ § once or repeatedly until the desired track number appears in the display. For MP3/WMA-CD: First press ALB +/- once or more to select your album.

•In the pause/stop position, press 2; to start playback.

Finding a passage within a track

1During playback, press and hold ∞ or §.

➜The CD is played at high speed and with reduced volume.

2When you recognize the passage you want, release ∞ or § to resume normal playback.

Helpful hints:

–When your searching reaches the end of the last track, the CD goes to stop mode.

Programming track numbers

You may store up to 20 tracks in the desired sequence. If you like, store any track more than once.

1In the stop position, press PROG to activate programming.

➜Display: PROG and P01 flash. (See 4)

2Press ∞ or § to select your desired track number.

For MP3/WMA-CD: first press ALB +/- once or more to select your album.

3Press PROG to store the desired track number.

➜Display: PROG and P02 flash for you to program the next track.

4Repeat steps 2 to 3 to select and store all desired tracks in this way.

➜If you attempt to store more than 20 tracks, no track can be selected and the display shows ---.

5To play your program, press 2/;.

Helpful hints :

–When playback of your program comes to the stop position, your set will return to normal playback.To re-enter program mode, press PROG in the stop position.

Reviewing the program

In the stop position, press PROG repeatedly to see your stored tracks.

Erasing a program

You can erase the contents of the memory by:

–in the stop position, press PROG to enter program mode, and then press 9.

–selecting USB, FM, MW or OFF;

–opening the CD door;