I.Mini NAS Hardware Installation
1. To open the mini NAS, remove the 2 screws located at the bottom part of the enclosure.
2. Insert the SATA drive into the SATA connector and secure the drive using the screws provided.
3. Connect LAN cable to uplink port to LAN switch and/or router.
On/Off Power Switch | Network Link / Access LED 4. | Connect 5V power adapter |
USB Port for Printer Server | then power up the mini NAS. | |
5V Power Jack |
|
Uplink Port to Router
Factory Reset Button
Mini NAS connected directly to a computer’s NIC card
If you connect the mini NAS to a computer directly, the will act as a DHCP server, assigning itself an IP address automatically and will also assign an IP address to the computer’s network card. This configuration will not enable you to see the drive on the network.
Mini NAS connected to a Router or Switch
When the mini NAS is connected to a LAN network with an active DHCP server, it will obtain an IP address from DHCP server automatically. Or if your LAN network does not have an active DHCP server, mini NAS will immediately act as DHCP server and assign itself an IP address for installation
II.Search mini NAS using SDisk Utility
1.Browse the CD enclosed in the product package. Copy and paste “SDisk Utility” in to your computer then double click the icon to start search.
Note: “SDisk utility” was written with JAVA script, please make sure your computer has installed JAVA before, if not please install the JAVA JRE from the CD drive.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |