NAS 4.0 Unit Boot Process | Addonics Technologies NAS40ESU guide

The NAS 4.0 Unit Boot Process

Upon powering up the unit, the status LED will blink at first between bright and dim, then remain dark for a few moments, then begin to blink between bright and dark for a while and finally settle down to glowing steadily. Once this pattern is complete the unit is ready to communicate.

This process normally takes about a minute or less, but may take longer depending on the complexity of the configuration, storage and LAN connections. With the 240 possible file systems, booting may take several minutes or longer.

Resetting the NAS unit

Should a problem arise with the NAS 4.0 unit or its configuration, the unit may be reset simply by disconnecting power and reconnecting after a few moments. If this doesn't clear the problem, the unit may be returned to its factory configuration by gently pressing and holding the reset button between the power and LAN connectors until the Status LED blinks slowly, then rapidly. After releasing the Reset button while blinking slowly there will be no changes. After releasing the button once the Status LED blinks rapidly, the Status LED will continue to blink for a while, and may possibly glow steadily for a while as well. Eventually it will begin the boot process, beginning with blinking between bright and dim. Once the boot process is complete and the LED is glowing steadily again, all settings will have been cleared and the unit is ready to communicate with all settings reset to the factory default – including the network and device name settings.

If the process appears to become stuck or takes too long to complete, you can try disconnecting power, then reconnect and after the Status LED blinks bright and dark a few times, try the Reset button again.

Initial Setup

Windows: All of the NAS 4.0 unit's functions and features are configured using a Web Interface. Once the hardware is installed, access the Web Interface with a web browser on a computer attached to the same network by typing in “http://addnas” - this will work on most Windows systems. Be sure the computer accessing the NAS has the Workgroup name set to WORKGROUP.

MAC: Mac users may need to determine the NAS 4.0 unit's IP address by opening a Terminal window and typing the following command:

smbutil lookup addnas

This utility should return the NAS 4.0 unit's IP address. Typing this address into the web browser should open the NAS 4.0 unit's Web Interface.

Linux: Linux users may need to determine the NAS 4.0 unit's IP address if Windows name resolution support is not fully installed and configured, by examining the DHCP server's clients table and attempting to connect to each unidentified IP address using a browser until the NAS 4.0 unit's Web Interface appears.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/

NAS40ESU specifications

Addonics Technologies has made substantial advancements in the realm of network-attached storage (NAS) solutions with the introduction of the NAS40ESU. This versatile device is engineered to meet the growing demands for secure and efficient data storage in small and medium-sized business environments as well as personal use.

One of the standout features of the NAS40ESU is its multi-bay design. It comes equipped with four drive bays, allowing users to install multiple hard drives for enhanced storage capacity. This modular approach provides a maximum storage space of up to 40TB, depending on the selected drives, making it suitable for extensive data archiving and backup purposes. The flexibility of the NAS40ESU extends to its compatibility with various drive types, allowing users to incorporate both SSDs and HDDs to optimize performance.

The NAS40ESU supports RAID configurations such as 0, 1, 5, 6, and 10, allowing users to customize their data protection strategies. With RAID support, users can achieve redundancy, improving data integrity and minimizing the risk of data loss. Additionally, the device features hot-swappable drive bays, enabling users to replace drives without downtime, which is crucial for businesses that need to ensure continuous operation.

Performance-wise, the NAS40ESU employs a high-speed Gigabit Ethernet connection, facilitating quick data transfer rates and making it an efficient option for file sharing across multiple devices. Equipped with a powerful processor and ample RAM, the system ensures smooth multitasking and efficient data handling, which is particularly important for environments with heavy workloads.

The NAS40ESU is designed with user-friendliness in mind, featuring a straightforward web-based user interface that simplifies configuration and management. Users can easily set up shared folders, manage access permissions, and monitor system health through this intuitive interface. Moreover, the device supports multiple network file protocols, including SMB/CIFS, FTP, and NFS, ensuring compatibility with different operating systems and devices.

Security is a cornerstone of the NAS40ESU’s design, with features that include encrypted data transmission and user authentication options. This ensures that sensitive data remains protected from unauthorized access, which is increasingly vital in today's digital landscape.

In summary, the Addonics Technologies NAS40ESU stands out as a robust and flexible network-attached storage solution. With its extensive storage capacity, versatile RAID options, high-speed connectivity, user-friendly interface, and strong security measures, it makes an excellent choice for anyone needing dependable and scalable storage solutions.