Array 1
Front
Back
Array 2 | Array 3 | |
|
|
|
Power Switch
System Reset
Buzzer Reset
Array 4
Fans
LED Display
Redundant Power Supply
Mini SAS Connector
Power Switch: This is the switch to power on devices connected to the power supply. The power LED will light up to indicate power is supplied.
Note: The main power switch located at the back of the enclosure must be turned on first.
Reset Button: Not operational.
Buzzer Reset: Pressing the button stops the overheat buzzer from making a sound. The buzzer will make a sound when temperature inside the storage rack exceeds the temperature setting on the Thermal Management card.
Note: Buzzer reset switch does not silence the port multiplier buzzer.
Power LED: Lights up when the power switch is turned on.
Temp LED: Lights up when temperature setting inside the storage rack exceeds the setting on the thermal card.
Fan LED: Normally on when fan is operational. If an abnormal condition is detected, the LED flashes.
HDD LED: Not operational.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |