Addonics Technologies RR2035ASDES manual When will rebuild action start?

Page 10

Notes on Spare Drives using the Easy RAID Setting (EZ)

When EZ function is ENABLED, the auto-rebuilding to spare drive is automatic.

The degraded RAID group will start rebuilding automatically by using the existing spare drive.

*Spare drive can be either plugged after RAID building or a new drive can be plug as the spare drive when RAID rebuild is required.

When will rebuild action start?

When the raid fails and EZ is enabled, the HPM-XA will automatically rebuild the RAID group using the spare.

When the raid fails and EZ is disabled, the HPM-XA will NOT rebuild the raid group unless you install a good drive to replace the failed drive.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/

Image 10
Contents Technical Support Hours 830 am 600 pm PST PhoneBuzzer Reset Front Power SwitchSystem Reset BackInstalling drives into the RAID Rack How to Remove the Top Cover Thermal Management Card on the RAID RackDip Switch Settings HPM-XA Port MultiplierLED Pin Header Default factory DIP Switch settingError LED Activity LEDCable Connections SW1 RAID Setting Notes When will rebuild action start? Connecting the Power Cable and RAID Rack to the Computer Power SupplyRAID Rack with Port Multiplier Compatibility Contact US