Addonics Technologies CRT535PES manual Hd Led

Page 3

HD LED

Auxillary Power Switch

HD LED

R

eSATA

Cipher

HD Power Switch

HDD

CipherChain

PWR

eSATA Port

Power & HDD LED

Cipher Keyhole

II.Connecting the power cable and Cipher Tower to the computer

a.Connect the power cord provided from the wall outlet to the back of the Cipher Tower.

b.A main power switch is located at the back of the tower. Turn the switch on. Another auxiliary switch is located on the front of the tower.

c.Make sure the power is off on the auxiliary switch (power LED light should be off)

d.Connect the provided eSATA cable from the back of the Cipher Tower to the eSATA controller card on the computer.

Note: Check with your system supplier to confirm the PM support on your existing eSATA port

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/

Image 3
Contents Hours 830 am 600 pm PST Phone Technical SupportStep Installing drive into the Cipher towerKeeping track of the hard drive Cipher keyHD LED IV. How to operate the Cipher tower after initial setup III. Initial setup of the Cipher tower