6.8. Calc. Checksum
Calculates a checksum value for the Copy Area function defined in the Setup Menu.
NOTE: This function is not to be used to validate copies. Media that have identical content and structure may still have different checksums. Testing media devices for accurate duplication should only be done using the Compare function.
Setup Menu
7.1. Startup Menu
Defines the function that will appear by default after
Default is 1. Copy.
7.2. Copy Area
Determines the method for copying from the source device to the target devices: “Whole Media” copies the entire device,
Default is “System and Files.”
7.3. Button Beep
Enables or disables the unit sounding a “beep” noise when buttons are pressed.
7.4. Asyn Hold Time
During operations that use Asynchronous Mode, this setting determines the delay after all media have been removed before confirming that an operation is complete. Once that delay has been expired, the operation will halt and the display will request confirmation to exit the function. Press OK to confirm the exit, ESC to resume the function.
Settings are “Turn OFF” to disable this feature, meaning Asynchronous functions will continue indefinitely until ESC is pressed, or a selection of delay in seconds or minutes.
Default is “Turn OFF.”
7.5. Target Tolerance
Used to define the acceptable difference in capacity during the copy func- tion, using one of three settings:
No Limit: Target capacity will not be considered before proceeding.
100% Same: Target capacity will be considered suitable only if the capacity is identical to the source.
Allow tolerance: Selecting this option offers two additional choices: Set UP Limit allows either “No Limit” or a percentage greater than the source capacity. Set LOW Limit allows either “No Limit” or a percentage less than the source capacity.
The Target Tolerance menu item displays the current setting in parentheses. Default is “No Limit.”
NOTE: The size of the file system on the source is always duplicated with all contents. Target devices greater than or less than the source capacity will not reflect any changes to correct the difference.
www.addonics.com
Technical Support | Phone: | Email: www.addonics.com/support/query/ |