Addonics Technologies DCDCS256S Model DCDCS256U, Data Internal Connection, External Connection

Model: DCDCS256U

Power: Using the 4-pin floppy connector of the Y-cable, connect it to the floppy- type power connector on the converter. To provide power for the y-cable, connect it to one of your desktop's 4-pin molex cable.

Data:

Internal Connection

Use the USB 5-pin header cable to connect to the 5-pin connection on the converter located below the USB Type B connector to the 5-pin USB connection on your motherboard.

External Connection

Use the USB Type A-B data cable to connect the converter to the USB port on your system.

LED cable: Only needed if you want to get drive access signal from the SATA to USB2.0 converter. Use the LED cable to connect the LED pin located at the back of the cradle (beside the LED switch) to the LED jumper pins on the SATA to USB2.0 converter to enable the drive activity LED.

Factory default, LED signal coming from hard drive.

Technical Support

If you need assistance to get your unit functioning properly, please call Addonics Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. Calling the technical support staff without all the proper information can be both time consuming and frustrating. Here are some tips to help you out:

MODEL NUMBER – Please have this number on hand. SYSTEM INFORMATION – Type of computer, peripherals, etc. OPERATING SYSTEM – What version of Windows WHAT’S THE TROUBLE? – Give enough information

about your problem so that we can recreate and diagnose it.

FREE Software Drivers for all Addonics Technologies

Products are available 24 hours per day at the

World Wide Web Site: www.addonics.com

Contact Information

Phone:408-573-8580

Fax:408-573-8588

Email:http://www.addonics.com/sales/query/

Internet: http://www.addonics.com

TECHNICAL SUPPORT

Phone:	408-453-6212
Hours:	8:30 am - 6:00 pm PST
Email:	http://www.addonics.com/support/query/