Apple G5 manual DDR Sdram Dimm

3Open the ejectors on the DIMM slots by pushing them out to the sides.

4Placing one hand on the back of the computer for support, align the first DIMM in the slot and push both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.

Important: Do not touch the DIMM connectors. Handle the DIMM only by the edges.

5Align the second DIMM in the opposite slot and push until the ejectors snap into place.

DDR SDRAM DIMM

(Your DIMM’s shape and components may vary.)

The DDR SDRAM DIMM fits into the slot only one way. Align the notch in the DIMM with the small rib inside the slot. With the ejectors open (as shown), push the DIMM until it snaps into place. The ejectors close automatically.

Ejectors

(They should be pushed outward to be in the open position, as shown.)

To make sure the DIMMs are properly seated

in their slots, place one hand behind the computer and hold the computer so that it does not move. With your other hand, press each DIMM

firmly into its slot.

Connectors	Notch	DDR SDRAM slot
	Rib (inside slot)

Your computer will have either 4 or 8 DDR SDRAM slots, depending on model.

Chapter 3 Working Inside Your Computer

49