2. Connect the video cable.
Connect one end of the DVI-D cable to the monitor DVI-D socket and the other end to the DVI-D port on your computer.
The DVI-D format is used for direct digital connection between source video and digital LCD monitors or projectors. The digital video signals produce a superior quality picture than analog video signals.
If you don’t have an appropriate DVI-D port on your computer, you can use the standard video D-Sub cable.
Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor D-Sub socket. Connect the other plug of the D-Sub cable (at the end with the ferrite filter) to the computer video D-Sub socket.
Tighten all finger screws to prevent the plugs from accidently falling out during use.
3. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled ’POWER IN’ on the rear of the monitor. Do not connect the other end to a power point just yet.
7How to install your monitor hardware
