BenQ E700A, E900W, E2000WA, E900A Connect the PC video cable, Connect the audio cable. optional

Page 8

2. Connect the PC video cable.

Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connected to two different PCs with appropriate video systems. (Not available for analog-only models)

Connect one end of the DVI-D cable to the monitor DVI-D socket and the other end to the DVI-D port on your computer. (optional, not available for analog-only models)

The DVI-D format is used for direct digital connection between source video and digital LCD monitors or projectors. The digital video signals produce a superior quality picture than analog video signals.

Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor D-Sub socket. Connect the other plug of the D-Sub cable (at the end with the ferrite filter) to the computer video D-Sub socket.

Tighten all finger screws to prevent the plugs from acci- dently falling out during use.

3. Connect the audio cable. (optional)

Connect the audio cable between the socket on the rear of the monitor and your computer audio outlet.

If you wish, you may connect an earphone into the earphone socket located on the side panel of the monitor.

Either

Or

8 Assembling your monitor hardware

Image 8
Contents Welcome Copyright Table of Contents Getting started CD-ROMGetting started Getting to know your monitor Front viewBack view Earphone socketAssembling your monitor hardware Attach the monitor baseConnect the PC video cable Connect the audio cable. optionalRoute the cables via the cable clip Connect the power cable to the monitorConnect-to and turn-on the power How to detach the stand base Prepare the monitor and areaGetting the most from your BenQ monitor How to install the monitor on a new computer How to upgrade the monitor on an existing computer SeeHow to install on Windows Vista systems Open Display SettingsClick the Advanced Settings button Click Continue in the prompted User Account Control windowHow to install on Windows XP system Open Display PropertiesPicture optimization How to adjust your monitor Control panel 1 models with speakersControl panel 2 non-speaker models On Screen Display OSD menu structure PictureSystem Hot key mode 1 models with speakers Volume hot keyMode hot key Input hot key not available for analog-only modelsHot key mode 2 non-speaker models Brightness and Contrast hot keysMain menu mode Display menu Function Operation RangeOptimization on Picture menu YES Picture Advanced menu Selected mode from Picture Mode. The screenAudio menu Input Selects the D-sub analog Press the tor ukeys to OSD Settings Press Enter to enter the OSD Settings menuSystem menu Japanese CzechTraditional ChinesePress Menu to leave the OSD Settings menu DDC/CITroubleshooting Frequently asked questions FAQNeed more help?