4. Route the cables via the loose bracket.
Release the cable retaining clip by squeezing the clip inwards as illustrated. Position the cables together and reinsert the clip over them to retain the cables neatly in place behind the monitor stand.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point and turn it on.
Turn on the monitor by pressing the power button located at the top of the row of buttons on the right edgeof the monitor.
Turn on the computer too, and follow the instructions in Section 4: Getting the most from your BenQ monitor to install the monitor software.
How to install your monitor hardware | 8 |