8Disconnect cable from card.
Installing the
Replacement Cable
and the Card
1Connect replacement cable to card.
2Re-install card in slot.
Note: You can install card in PCI slot 1, 2, or
3.Installed in slot 2, it blocks slot 3. Installed in slot 3, it blocks slot
4.Because of card’s height, do not install it in slot 4.
Note: Make sure end of card goes into correct card guide. Then align card’s connector with expansion slot and press down until connector is inserted all the way into slot.
3Connect card’s cables to connectors on backplane board.
© 2009 Apple Inc. All rights reserved. |